lkml.org 
[lkml]   [2024]   [Feb]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 10/14] serial: 8250_of: Switch to use uart_read_port_properties()
From
Date
On Thu, 2024-02-22 at 18:47 +0200, Andy Shevchenko wrote:
> On Thu, Feb 22, 2024 at 06:43:08PM +0200, Andy Shevchenko wrote:
> > On Thu, Feb 22, 2024 at 03:23:24PM +0200, Andy Shevchenko wrote:
> > > On Thu, Feb 22, 2024 at 11:07:05AM +1030, Andrew Jeffery wrote:
> > > > On Wed, 2024-02-21 at 20:31 +0200, Andy Shevchenko wrote:
> > > > > Since we have now a common helper to read port properties
> > > > > use it instead of sparse home grown solution.
> > > >
> > > > I did some brief testing of the series for the Aspeed machines under
> > > > qemu, building them on top of v6.8-rc5:
> > > >
> > > > export ARCH=arm
> > > > export CROSS_COMPILE=arm-linux-gnueabihf-
> > > > make aspeed_g5_defconfig
> > > > make -j$(nproc)
> > > > qemu-system-arm -M rainier-bmc -nographic -no-reboot -kernel arch/arm/boot/zImage -dtb arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dtb -initrd ...
> > > >
> > > > I got an oops during boot, which bisected to this change:
> > >
> > > Thank you for prompt testing! I will look at it.
> >
> > I found the issue, will be fixed in next version.
>
> Whoever is going to test this series, the
>
> - port->iotype = use_defaults ? UPIO_MEM : port->iotype;
> + port->iotype = UPIO_MEM;
>
> should be applied to uart_read_port_properties() implementation.
>

Thanks, with that fix applied it works fine for me also.

Andrew

\
 
 \ /
  Last update: 2024-05-27 15:21    [W:0.190 / U:0.688 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site