lkml.org 
[lkml]   [2024]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v2 2/4] arm64: dts: qcom: Add SMB2360 pmic dtsi
Add nodes for SMB2360 with the eUSB2 repeater nodes.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
arch/arm64/boot/dts/qcom/smb2360.dtsi | 51 +++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/smb2360.dtsi b/arch/arm64/boot/dts/qcom/smb2360.dtsi
new file mode 100644
index 000000000000..8d7bdb56e6fe
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/smb2360.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+};
+
+&spmi_bus1 {
+ smb2360h: pmic@7 {
+ compatible = "qcom,smb2360", "qcom,spmi-pmic";
+ reg = <0x7 SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb2360_1_eusb2_repeater: phy@fd00 {
+ compatible = "qcom,smb2360-eusb2-repeater";
+ reg = <0xfd00>;
+ #phy-cells = <0>;
+ };
+ };
+
+ smb2360k: pmic@a {
+ compatible = "qcom,smb2360", "qcom,spmi-pmic";
+ reg = <0xa SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb2360_2_eusb2_repeater: phy@fd00 {
+ compatible = "qcom,smb2360-eusb2-repeater";
+ reg = <0xfd00>;
+ #phy-cells = <0>;
+ };
+ };
+
+ smb2360l: pmic@b {
+ compatible = "qcom,smb2360", "qcom,spmi-pmic";
+ reg = <0xb SPMI_USID>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ smb2360_3_eusb2_repeater: phy@fd00 {
+ compatible = "qcom,smb2360-eusb2-repeater";
+ reg = <0xfd00>;
+ #phy-cells = <0>;
+ };
+ };
+};
--
2.34.1


\
 
 \ /
  Last update: 2024-05-27 15:14    [W:0.076 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site