lkml.org 
[lkml]   [2024]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/4] dt-bindings: iio: adc: ad7192: Add properties
From
On 14.11.2023 22:29, Krzysztof Kozlowski wrote:
> On 14/11/2023 21:05, Alisa-Dariana Roman wrote:
>> Document properties used for clock configuration.
>
> Some background here is missing - otherwise it looks like you are adding
> new properties...
>
>>
>> Signed-off-by: Alisa-Dariana Roman <alisa.roman@analog.com>
>> ---
>> .../devicetree/bindings/iio/adc/adi,ad7192.yaml | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
>> index 16def2985ab4..9b59d6eea368 100644
>> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
>> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
>> @@ -80,6 +80,16 @@ properties:
>> and when chop is disabled.
>> type: boolean
>>
>> + adi,clock-xtal:
>> + description: |
>> + External crystal connected from MCLK1 to MCLK2.
>
> And this should be input clock.
>
>> + type: boolean
>> +
>> + adi,int-clock-output-enable:
>> + description: |
>> + Internal 4.92 MHz clock available on MCLK2 pin.
>> + type: boolean
>
> This should be clock-cells and clock provider.
>
> Unless you are just documenting already used interface which you do not
> want to break...
>
>> +
>> bipolar:
>> description: see Documentation/devicetree/bindings/iio/adc/adc.yaml
>> type: boolean
>
> Best regards,
> Krzysztof
>

Thank you very much for the feedback!

If I understand correctly, there is already an input clock in the bindings:
```
clocks:
maxItems: 1
description: phandle to the master clock (mclk)

clock-names:
items:
- const: mclk
```

What I wanted to accomplish with this patch is to document these boolean
properties (from the ad7192 driver code):
```
/* use internal clock */
if (!st->mclk) {
if (device_property_read_bool(dev, "adi,int-clock-output-enable"))
clock_sel = AD7192_CLK_INT_CO;
} else {
if (device_property_read_bool(dev, "adi,clock-xtal"))
clock_sel = AD7192_CLK_EXT_MCLK1_2;
else
clock_sel = AD7192_CLK_EXT_MCLK2;
}
```

Please let me know how to proceed further!

Kind regards,
Alisa-Dariana Roman

\
 
 \ /
  Last update: 2024-05-27 14:46    [W:0.088 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site