lkml.org 
[lkml]   [2024]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v3 1/3] arm64: dts: hi3798cv200: fix the size of GICR
From: Yang Xiwen <forbidden405@outlook.com>

During boot, Linux kernel complains:

[ 0.000000] GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set

This SoC is using a regular GIC-400 and the GICR space size should be
8KB rather than 256B.

With this patch:

[ 0.000000] GIC: Using split EOI/Deactivate mode

So this should be the correct fix.

Fixes: 2f20182ed670 ("arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Cc: stable@vger.kernel.org
---
arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
index ed1b5a7a6067..d01023401d7e 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
@@ -58,7 +58,7 @@ cpu@3 {
gic: interrupt-controller@f1001000 {
compatible = "arm,gic-400";
reg = <0x0 0xf1001000 0x0 0x1000>, /* GICD */
- <0x0 0xf1002000 0x0 0x100>; /* GICC */
+ <0x0 0xf1002000 0x0 0x2000>; /* GICC */
#address-cells = <0>;
#interrupt-cells = <3>;
interrupt-controller;
--
2.43.0


\
 
 \ /
  Last update: 2024-05-27 15:10    [W:0.118 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site