lkml.org 
[lkml]   [2024]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] arm64: dts: ti: k3-j722s-evm: Enable OSPI NOR support
Date
J722S EVM has S28HS512T 64 MiB Octal SPI NOR flash connected
to the OSPI interface, add support for the flash and describe
the partition information as per bootloader.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
---

V1->V2:
* Update comments indicating PAD numbers.

arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 79 +++++++++++++++++++++++++
1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index 9e12a6e9111f..cee3a8661d5e 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -169,6 +169,23 @@ J722S_IOPAD(0x015c, PIN_INPUT, 0) /* (AD25) MDIO0_MDIO */
>;
};

+ ospi0_pins_default: ospi0-default-pins {
+ pinctrl-single,pins = <
+ J722S_IOPAD(0x0000, PIN_OUTPUT, 0) /* (L24) OSPI0_CLK */
+ J722S_IOPAD(0x002c, PIN_OUTPUT, 0) /* (K26) OSPI0_CSn0 */
+ J722S_IOPAD(0x000c, PIN_INPUT, 0) /* (K27) OSPI0_D0 */
+ J722S_IOPAD(0x0010, PIN_INPUT, 0) /* (L27) OSPI0_D1 */
+ J722S_IOPAD(0x0014, PIN_INPUT, 0) /* (L26) OSPI0_D2 */
+ J722S_IOPAD(0x0018, PIN_INPUT, 0) /* (L25) OSPI0_D3 */
+ J722S_IOPAD(0x001c, PIN_INPUT, 0) /* (L21) OSPI0_D4 */
+ J722S_IOPAD(0x0020, PIN_INPUT, 0) /* (M26) OSPI0_D5 */
+ J722S_IOPAD(0x0024, PIN_INPUT, 0) /* (N27) OSPI0_D6 */
+ J722S_IOPAD(0x0028, PIN_INPUT, 0) /* (M27) OSPI0_D7 */
+ J722S_IOPAD(0x0008, PIN_INPUT, 0) /* (L22) OSPI0_DQS */
+ >;
+ bootph-all;
+ };
+
rgmii1_pins_default: rgmii1-default-pins {
pinctrl-single,pins = <
J722S_IOPAD(0x014c, PIN_INPUT, 0) /* (AC25) RGMII1_RD0 */
@@ -290,6 +307,68 @@ exp1: gpio@23 {
};
};

+&ospi0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ospi0_pins_default>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0x0>;
+ spi-tx-bus-width = <8>;
+ spi-rx-bus-width = <8>;
+ spi-max-frequency = <25000000>;
+ cdns,tshsl-ns = <60>;
+ cdns,tsd2d-ns = <60>;
+ cdns,tchsh-ns = <60>;
+ cdns,tslch-ns = <60>;
+ cdns,read-delay = <4>;
+ bootph-all;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "ospi.tiboot3";
+ reg = <0x00 0x80000>;
+ };
+
+ partition@80000 {
+ label = "ospi.tispl";
+ reg = <0x80000 0x200000>;
+ };
+
+ partition@280000 {
+ label = "ospi.u-boot";
+ reg = <0x280000 0x400000>;
+ };
+
+ partition@680000 {
+ label = "ospi.env";
+ reg = <0x680000 0x40000>;
+ };
+
+ partition@6c0000 {
+ label = "ospi.env.backup";
+ reg = <0x6c0000 0x40000>;
+ };
+
+ partition@800000 {
+ label = "ospi.rootfs";
+ reg = <0x800000 0x37c0000>;
+ };
+
+ partition@3fc0000 {
+ label = "ospi.phypattern";
+ reg = <0x3fc0000 0x40000>;
+ };
+ };
+ };
+
+};
+
&sdhci1 {
/* SD/MMC */
vmmc-supply = <&vdd_mmc1>;
--
2.34.1

\
 
 \ /
  Last update: 2024-05-27 15:09    [W:0.223 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site