lkml.org 
[lkml]   [2024]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 1/2] dt-bindings: i2c: pca954x: Add custom properties for MAX7357
Hi Andi,


On Thu, 15 Feb 2024 at 02:42, Andi Shyti <andi.shyti@kernel.org> wrote:
>
> Hi Naresh,
>
> On Tue, Feb 13, 2024 at 07:52:26PM +0530, Naresh Solanki wrote:
> > From: Patrick Rudolph <patrick.rudolph@9elements.com>
> >
> > Maxim Max7357 has a configuration register to enable additional
> > features. These features aren't enabled by default & its up to
> > board designer to enable the same as it may have unexpected side effects.
> >
> > These should be validated for proper functioning & detection of devices
> > in secondary bus as sometimes it can cause secondary bus being disabled.
> >
> > Add booleans for:
> > - maxim,isolate-stuck-channel
> > - maxim,send-flush-out-sequence
> > - maxim,preconnection-wiggle-test-enable
> >
> > Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> > Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
> > Reviewed-by: Rob Herring <robh@kernel.org>
>
> this series was already applied and I sent the notification.
> Didn't you receive it?
>
> You can check here[*] (branch i2c/i2c-host).
Acknowledged. Thanks.

Regards,
Naresh
>
> Thanks,
> Andi
>
> [*] https://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git/log/?h=i2c/i2c-host

\
 
 \ /
  Last update: 2024-05-27 15:04    [W:0.073 / U:1.500 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site