lkml.org 
[lkml]   [2024]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 3/3] PCI: qcom: properly implement RC shutdown/power up
From
On 15.02.2024 08:13, Johan Hovold wrote:
> On Wed, Feb 14, 2024 at 10:33:19PM +0100, Konrad Dybcio wrote:
>> On 12.02.2024 22:32, Bjorn Helgaas wrote:
>>> "Properly" is a noise word that suggests "we're doing it right this
>>> time" but doesn't hint at what actually makes this better.
>>>
>>> On Sat, Feb 10, 2024 at 06:10:07PM +0100, Konrad Dybcio wrote:
>>>> Currently, we've only been minimizing the power draw while keeping the
>>>> RC up at all times. This is suboptimal, as it draws a whole lot of power
>>>> and prevents the SoC from power collapsing.
>>>
>>> Is "power collapse" a technical term specific to this device, or is
>>> there some more common term that could be used? I assume the fact
>>> that the RC remains powered precludes some lower power state of the
>>> entire SoC?
>>
>> That's spot on, "power collapse" commonly refers to shutting down as many
>> parts of the SoC as possible, in order to achieve miliwatt-order power draw.
>
> I'm pretty sure "power collapse" is a Qualcomm:ism so better to use
> common terminology as Bjorn suggested, and maybe put the Qualcomm
> wording in parenthesis or similar.

Ok, I keep hearing it so much that I had previously assumed it's the
standard way of describing it.. I'll reword this.

Konrad

\
 
 \ /
  Last update: 2024-05-27 15:04    [W:0.300 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site