lkml.org 
[lkml]   [2024]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/3] ARM: dts: microchip: sama7g5: Add flexcom 10 node
Date
Add flexcom 10 node for usage on the SAMA7G54 Curiosity board.

Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
---
arch/arm/boot/dts/microchip/sama7g5.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/microchip/sama7g5.dtsi b/arch/arm/boot/dts/microchip/sama7g5.dtsi
index 269e0a3ca269..c030b318985a 100644
--- a/arch/arm/boot/dts/microchip/sama7g5.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7g5.dtsi
@@ -958,6 +958,30 @@ i2c9: i2c@600 {
};
};

+ flx10: flexcom@e2820000 {
+ compatible = "atmel,sama5d2-flexcom";
+ reg = <0xe2820000 0x200>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0xe2820000 0x800>;
+ status = "disabled";
+
+ i2c10: i2c@600 {
+ compatible = "microchip,sama7g5-i2c", "microchip,sam9x60-i2c";
+ reg = <0x600 0x200>;
+ interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 48>;
+ atmel,fifo-size = <32>;
+ dmas = <&dma0 AT91_XDMAC_DT_PERID(26)>,
+ <&dma0 AT91_XDMAC_DT_PERID(25)>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+ };
+
flx11: flexcom@e2824000 {
compatible = "atmel,sama5d2-flexcom";
reg = <0xe2824000 0x200>;
--
2.43.0

\
 
 \ /
  Last update: 2024-05-27 15:04    [W:0.107 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site