lkml.org 
[lkml]   [2024]   [Feb]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v2 1/2] dt-bindings: usb: dwc3: drop 'snps,host-vbus-glitches-quirk'
Drop 'snps,host-vbus-glitches-quirk'. It is safer to keep vbus disabled
before handing over to xhci driver. Needn't this property to control enable
workaround. Apply workaround unconditional.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 7 -------
1 file changed, 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 8f5d250070c78..203a1eb66691f 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -273,13 +273,6 @@ properties:
with an external supply.
type: boolean

- snps,host-vbus-glitches-quirk:
- description:
- When set, power off all Root Hub ports immediately after
- setting host mode to avoid vbus (negative) glitch happen in later
- xhci reset. And the vbus will back to 5V automatically when reset done.
- type: boolean
-
snps,is-utmi-l1-suspend:
description:
True when DWC3 asserts output signal utmi_l1_suspend_n, false when
--
2.34.1


\
 
 \ /
  Last update: 2024-05-27 14:58    [W:0.759 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site