lkml.org 
[lkml]   [2024]   [Jan]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 0/6] Add PPE device tree node for Qualcomm IPQ SoC
From


On 1/10/2024 8:13 PM, Krzysztof Kozlowski wrote:
> On 10/01/2024 12:20, Luo Jie wrote:
>> The PPE(packet process engine) hardware block is supported by Qualcomm
>> IPQ platforms, such as IPQ9574 and IPQ5332. The PPE includes the various
>> packet processing modules such as the routing and bridging flow engines,
>> L2 switch capability, VLAN and tunnels. Also included are integrated
>> ethernet MAC and PCS(uniphy), which is used to connect with the external
>> PHY devices by PCS.
>>
>> This patch series enables support for the following DTSI functionality
>> for Qualcomm IPQ9574 and IPQ5332 chipsets.
>>
>> 1. Add PPE (Packet Processing Engine) HW support
>>
>> 2. Add IPQ9574 RDP433 board support, where the PPE is connected
>> with qca8075 PHY and AQ PHY.
>>
>> 3. Add IPQ5332 RDP441 board support, where the PPE is connected
>> with qca8386 and SFP
>>
>> PPE DTS depends on the NSSCC clock driver below, which provides the
>> clocks for the PPE driver.
>
> DTS cannot depend on clock drivers. Maybe you meant that it depends on
> NSSCC clock controller DTS changes, which would be fine. However
> depending on drivers is neither necessary nor allowed.
>
> Best regards,
> Krzysztof
>

Yes, this DTSI series depends on the NSSCC clock controller DTS patches
which are referred to in the cover letter. I will rectify the cover
letter text when the series resumes later.


\
 
 \ /
  Last update: 2024-01-12 16:01    [W:0.051 / U:1.312 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site