Messages in this thread Patch in this message | | | Date | Wed, 6 Sep 2023 16:44:35 +0300 | From | Laurent Pinchart <> | Subject | Re: [PATCH v2] media: uvcvideo: Fix power line control for a Chicony camera |
| |
Hi Ricardo,
On Tue, Sep 05, 2023 at 03:29:52PM +0000, Ricardo Ribalda wrote: > The device does not implement the control properly. > > Fixes v4l2-compliance error: > > info: checking control 'Power Line Frequency' (0x00980918) > fail: v4l2-test-controls.cpp(552): could not set valid menu item 3 > > Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
This still applies :-)
I've taken the patch in my tree and will push it for v6.7.
> --- > This camera, like other Chicony devices, do not implement properly the > Power Line Frequency control. > > This time, I do not have direct access to the device, just to the > report, but since other devices from the same family are showing the > same error, it is safe to assume that the same fix will work here. > --- > Changes in v2: > - Fix IntefaceProtocol, the camera is uvc1.5 > - I managed to write 0 to the control, so the proper quirk is uvc11 not > limited > - Changes by Laurent: > - Rename device > - s/v4l/v4l2 > - Link to v1: https://lore.kernel.org/r/20230817-chicony-v1-1-76bde4d6ff6b@chromium.org > --- > drivers/media/usb/uvc/uvc_driver.c | 9 +++++++++ > 1 file changed, 9 insertions(+) > > diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c > index 08fcd2ffa727..4b5ea3501753 100644 > --- a/drivers/media/usb/uvc/uvc_driver.c > +++ b/drivers/media/usb/uvc/uvc_driver.c > @@ -2592,6 +2592,15 @@ static const struct usb_device_id uvc_ids[] = { > .bInterfaceSubClass = 1, > .bInterfaceProtocol = 0, > .driver_info = (kernel_ulong_t)&uvc_ctrl_power_line_limited }, > + /* Chicony Electronics Co., Ltd Integrated Camera */ > + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE > + | USB_DEVICE_ID_MATCH_INT_INFO, > + .idVendor = 0x04f2, > + .idProduct = 0xb67c, > + .bInterfaceClass = USB_CLASS_VIDEO, > + .bInterfaceSubClass = 1, > + .bInterfaceProtocol = UVC_PC_PROTOCOL_15, > + .driver_info = (kernel_ulong_t)&uvc_ctrl_power_line_uvc11 }, > /* Chicony EasyCamera */ > { .match_flags = USB_DEVICE_ID_MATCH_DEVICE > | USB_DEVICE_ID_MATCH_INT_INFO, > > --- > base-commit: 4853c74bd7ab7fdb83f319bd9ace8a08c031e9b6 > change-id: 20230817-chicony-9c35f2046c6f
-- Regards,
Laurent Pinchart
| |