lkml.org 
[lkml]   [2023]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/6] arm64: dts: qcom: sm8550-mtp: use correct UFS supply
From
On 6.09.2023 14:05, Krzysztof Kozlowski wrote:
> On 06/09/2023 13:50, Konrad Dybcio wrote:
>> On 6.09.2023 13:39, Krzysztof Kozlowski wrote:
>>> On 06/09/2023 13:28, Konrad Dybcio wrote:
>>>> On 6.09.2023 12:47, Krzysztof Kozlowski wrote:
>>>>> According to schematics the VCCQ2 supply is not connected and the L3G
>>>>> regulator instead powers up the controller pads (VDD_PX10). Use correct
>>>>> supply vdd-hba and drop unsupported current limit for the vdd-hba.
>>>> Why is it unsupported?
>>>
>>> Maybe I was here not precise. I move the regulator from vccq2 to
>>> vdd-hba. vccq2 has control of current in UFS core driver. Bindings also
>>> allow it.
>> Looks like the bindings are out of sync with the driver.
>>
>> ufshcd_populate_vreg() which parses current is used for both vccq2
>> and vdd-hba.
>
> Just for convenience. The current is not used for vdd-hba. Also:
>
> https://lore.kernel.org/all/20230906113302.201888-1-krzysztof.kozlowski@linaro.org/

I see, you're right.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad

\
 
 \ /
  Last update: 2023-09-06 14:08    [W:0.045 / U:22.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site