lkml.org 
[lkml]   [2023]   [Sep]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/5] i2c: rcar: properly format a debug output
Date
Use proper types and spacing.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
drivers/i2c/busses/i2c-rcar.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 49dfbeebf6b8..4bf47e35094f 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -323,7 +323,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv)
if (scgd == 0x40)
goto err_no_val;

- dev_dbg(dev, "clk %d/%d(%lu), round %u, CDF:0x%x, SCGD: 0x%x\n",
+ dev_dbg(dev, "clk %u/%u(%lu), round %u, CDF: %u, SCGD: %u\n",
scl, t.bus_freq_hz, rate, round, cdf, scgd);

/* keep icccr value */
--
2.35.1
\
 
 \ /
  Last update: 2023-09-06 22:05    [W:0.099 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site