lkml.org 
[lkml]   [2023]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 3/3] platform/x86: intel_scu_ipc: Fail IPC send if still busy
Quoting Mika Westerberg (2023-08-31 23:06:33)
> On Thu, Aug 31, 2023 at 05:07:26PM +0300, Andy Shevchenko wrote:
> > On Wed, Aug 30, 2023 at 06:14:03PM -0700, Stephen Boyd wrote:
> > > It's possible for interrupts to get significantly delayed to the point
> > > that callers of intel_scu_ipc_dev_command() and friends can call the
> > > function once, hit a timeout, and call it again while the interrupt
> > > still hasn't been processed. This driver will get seriously confused if
> > > the interrupt is finally processed after the second IPC has been sent
> > > with ipc_command(). It won't know which IPC has been completed. This
> > > could be quite disastrous if calling code assumes something has happened
> > > upon return from intel_scu_ipc_dev_simple_command() when it actually
> > > hasn't.
> > >
> > > Let's avoid this scenario by simply returning -EBUSY in this case.
> > > Hopefully higher layers will know to back off or fail gracefully when
> > > this happens. It's all highly unlikely anyway, but it's better to be
> > > correct here as we have no way to know which IPC the status register is
> > > telling us about if we send a second IPC while the previous IPC is still
> > > processing.
> >
> > > +static bool intel_scu_ipc_busy(struct intel_scu_ipc_dev *scu)
> >
> > static int ?
> >
> > > +{
> > > + u8 status;
> > > +
> > > + status = ipc_read_status(scu);
> > > + if (status & IPC_STATUS_BUSY) {
> >
> > > + dev_err(&scu->dev, "device is busy\n");
> >
> > 1. Wouldn't it exaggerate the logs? Shouldn't be rate limited?
> > 2. OTOH if we return -EBUSY directly from here, do we need this at all?
>
> Agree w/ returning -EBUSY here and dropping the dev_err() (or using
> dev_dbg()).

Ok. I'll change to dev_dbg(). I assume that this should never happen,
but you never know if some calling code will ignore the return -EBUSY
from the previous round and call again while the previous IPC is
processing.

\
 
 \ /
  Last update: 2023-09-06 00:43    [W:0.056 / U:2.792 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site