lkml.org 
[lkml]   [2023]   [Sep]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] power: supply: Don't count 'unknown' scope power supplies
Hi,

On Tue, Sep 26, 2023 at 05:59:54PM -0500, Mario Limonciello wrote:
> On some systems AMD Navi3x dGPU triggers RAS errors on startup; but
> only if the amdgpu kernel module is not part of the initramfs.
> This is because the hardware is not properly programmed for the
> AC/DC state of the system when it is loaded later in boot.

I don't understand the last sentence. As far as I can see
i2c_dw_pci_probe() either does not registers UCSI at all or
with the dGPU properties (and thus scope) set.

> The AC/DC state of the system is incorrect specifically when UCSI power
> supplies have been initialized. These power supplies are marked as
> POWER_SUPPLY_SCOPE_UNKNOWN scope. As they're 'offline' the power
> supply count is increased but the resultant return value is
> power_supply_is_system_supplied() 0.
>
> To fix this look explicitly for `POWER_SUPPLY_SCOPE_SYSTEM` power
> supplies before incrementing the count. If no system power supply
> is found then the system is assumed to be on AC.
>
> Cc: stable@vger.kernel.org
> Tested-by: David Perry <David.Perry@amd.com>
> Fixes: 95339f40a8b6 ("power: supply: Fix logic checking if system is running from battery")
> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
> ---

This effectively fully disables supply detection for UCSI, because
it is never set to POWER_SUPPLY_SCOPE_SYSTEM. Please fix the amdgpu
init part instead.

-- Sebastian

> drivers/power/supply/power_supply_core.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c
> index d325e6dbc770..3de6e6d00815 100644
> --- a/drivers/power/supply/power_supply_core.c
> +++ b/drivers/power/supply/power_supply_core.c
> @@ -349,7 +349,7 @@ static int __power_supply_is_system_supplied(struct device *dev, void *data)
> unsigned int *count = data;
>
> if (!psy->desc->get_property(psy, POWER_SUPPLY_PROP_SCOPE, &ret))
> - if (ret.intval == POWER_SUPPLY_SCOPE_DEVICE)
> + if (ret.intval != POWER_SUPPLY_SCOPE_SYSTEM)
> return 0;
>
> (*count)++;
> --
> 2.34.1
>
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2023-09-30 22:19    [W:0.090 / U:0.608 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site