lkml.org 
[lkml]   [2023]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 3/8] arm64: dts: qcom: ipq5332: Add USB Super-Speed PHY node
Date
Add USB Super-Speed UNIPHY node and populate the phandle on
gcc node for the parent clock map.

Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
---
arch/arm64/boot/dts/qcom/ipq5332.dtsi | 25 ++++++++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index d3fef2f80a81..b08ffd8c094e 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -158,6 +158,29 @@ usbphy0: phy@7b000 {
status = "disabled";
};

+ usbphy1: phy@4b0000 {
+ compatible = "qcom,ipq5332-usb-uniphy";
+ reg = <0x4b0000 0x800>;
+
+ clocks = <&gcc GCC_PCIE3X1_PHY_AHB_CLK>,
+ <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_USB0_PIPE_CLK>;
+ clock-names = "ahb",
+ "cfg_ahb",
+ "pipe";
+
+ resets = <&gcc GCC_USB0_PHY_BCR>;
+
+ #clock-cells = <0>;
+ clock-output-names = "usb0_pipe_clk_src";
+
+ qcom,phy-usb-mux-sel = <&tcsr 0x10540>;
+
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+
qfprom: efuse@a4000 {
compatible = "qcom,ipq5332-qfprom", "qcom,qfprom";
reg = <0x000a4000 0x721>;
@@ -200,7 +223,7 @@ gcc: clock-controller@1800000 {
<&sleep_clk>,
<0>,
<0>,
- <0>;
+ <&usbphy1>;
};

tcsr_mutex: hwlock@1905000 {
--
2.34.1
\
 
 \ /
  Last update: 2023-09-29 10:43    [W:0.193 / U:1.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site