Messages in this thread | | | Subject | Re: [PATCH net-next] net/smc: add support for netdevice in containers. | From | Niklas Schnelle <> | Date | Thu, 28 Sep 2023 17:04:21 +0200 |
| |
On Mon, 2023-09-25 at 10:35 +0800, Albert Huang wrote: > If the netdevice is within a container and communicates externally > through network technologies like VXLAN, we won't be able to find > routing information in the init_net namespace. To address this issue, > we need to add a struct net parameter to the smc_ib_find_route function. > This allow us to locate the routing information within the corresponding > net namespace, ensuring the correct completion of the SMC CLC interaction. > > Signed-off-by: Albert Huang <huangjie.albert@bytedance.com> > --- > net/smc/af_smc.c | 3 ++- > net/smc/smc_ib.c | 7 ++++--- > net/smc/smc_ib.h | 2 +- > 3 files changed, 7 insertions(+), 5 deletions(-) >
I'm trying to test this patch on s390x but I'm running into the same issue I ran into with the original SMC namespace support:https://lore.kernel.org/netdev/8701fa4557026983a9ec687cfdd7ac5b3b85fd39.camel@linux.ibm.com/
Just like back then I'm using a server and a client network namespace on the same system with two ConnectX-4 VFs from the same card and port. Both TCP/IP traffic as well as user-space RDMA via "qperf … rc_bw" and `qperf … rc_lat` work between namespaces and definitely go via the card.
I did use "rdma system set netns exclusive" then moved the RDMA devices into the namespaces with "rdma dev set <rdma_dev> netns <namespace>". I also verified with "ip netns exec <namespace> rdma dev" that the RDMA devices are in the network namespace and as seen by the qperf runs normal RDMA does work.
For reference the smc_chck tool gives me the following output:
Server started on port 37373 [DEBUG] Interfaces to check: eno4378 Test with target IP 10.10.93.12 and port 37373 Live test (SMC-D and SMC-R) [DEBUG] Running client: smc_run /tmp/echo-clt.x0q8iO 10.10.93.12 -p 37373 [DEBUG] Client result: TCP 0x05000000/0x03030000 Failed (TCP fallback), reasons: Client: 0x05000000 Peer declined during handshake Server: 0x03030000 No SMC devices found (R and D)
I also checked that SMC is generally working, once I add an ISM device I do get SMC-D between the namespaces. Any ideas what could break SMC-R here?
Thanks, Niklas
| |