Messages in this thread | | | Date | Wed, 27 Sep 2023 13:51:35 +0530 | Subject | Re: [PATCH V2 2/3] arm64: dts: qcom: sc7280: Add UFS nodes for sc7280 soc | From | Nitin Rawat <> |
| |
On 9/27/2023 12:01 AM, Konrad Dybcio wrote: > On 26.09.2023 18:20, Nitin Rawat wrote: >> Add UFS host controller and PHY nodes for sc7280 soc. >> >> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com> >> --- >> arch/arm64/boot/dts/qcom/sc7280.dtsi | 64 ++++++++++++++++++++++++++++ >> 1 file changed, 64 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi >> index 66f1eb83cca7..3be8ea090ade 100644 >> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi >> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi >> @@ -3353,6 +3353,70 @@ >> }; >> }; >> >> + ufs_mem_hc: ufs@1d84000 { >> + compatible = "qcom,sc7280-ufshc", "qcom,ufshc", >> + "jedec,ufs-2.0"; >> + reg = <0x0 0x01d84000 0x0 0x3000>; >> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; >> + phys = <&ufs_mem_phy>; >> + phy-names = "ufsphy"; >> + lanes-per-direction = <2>; >> + #reset-cells = <1>; >> + resets = <&gcc GCC_UFS_PHY_BCR>; >> + reset-names = "rst"; >> + >> + power-domains = <&gcc GCC_UFS_PHY_GDSC>; >> + required-opps = <&rpmhpd_opp_nom>; >> + >> + iommus = <&apps_smmu 0x80 0x0>; >> + dma-coherent; >> + >> + clock-names = "core_clk", >> + "bus_aggr_clk", >> + "iface_clk", >> + "core_clk_unipro", >> + "ref_clk", >> + "tx_lane0_sync_clk", >> + "rx_lane0_sync_clk", >> + "rx_lane1_sync_clk"; > As discussed, property-names is preferred to come after > property, just like in the other node you're adding. Sure. Updated this in latest patchset and updated the binding as well.
> > [...] > >> + ufs_mem_phy: phy@1d87000 { >> + compatible = "qcom,sc7280-qmp-ufs-phy"; >> + reg = <0x0 0x01d87000 0x0 0xe00>; >> + clocks = <&rpmhcc RPMH_CXO_CLK>, >> + <&gcc GCC_UFS_PHY_PHY_AUX_CLK>, >> + <&gcc GCC_UFS_1_CLKREF_EN>; >> + clock-names = "ref", "ref_aux", "qref"; >> + >> + resets = <&ufs_mem_hc 0>; >> + reset-names = "ufsphy"; >> + >> + #clock-cells = <1>; >> + #phy-cells = <0>; >> + >> + status = "disabled"; >> + >> + }; > Stray newline above. Removed this in latest Patchset
> > Konrad
Thanks, Nitin
| |