lkml.org 
[lkml]   [2023]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] ASoC: dt-bindings: rtq9128: Add TDM input source slect property
Date
From: ChiYuan Huang <cy_huang@richtek.com>

Create a boolean property to select TDM input source coms from 'DATA2'.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
---
.../devicetree/bindings/sound/richtek,rtq9128.yaml | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/richtek,rtq9128.yaml b/Documentation/devicetree/bindings/sound/richtek,rtq9128.yaml
index d117f08fff30..d54686a19ab7 100644
--- a/Documentation/devicetree/bindings/sound/richtek,rtq9128.yaml
+++ b/Documentation/devicetree/bindings/sound/richtek,rtq9128.yaml
@@ -28,6 +28,13 @@ properties:
enable-gpios:
maxItems: 1

+ richtek,tdm-input-data2-select:
+ type: boolean
+ description:
+ By default, if TDM mode is used, TDM data input will select 'DATA1' pin
+ as the data source. This option will configure TDM data input source from
+ 'DATA1' to 'DATA2' pin.
+
'#sound-dai-cells':
const: 0

--
2.34.1
\
 
 \ /
  Last update: 2023-09-28 05:42    [W:0.131 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site