lkml.org 
[lkml]   [2023]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] mmc: meson-gx: Remove setting of CMD_CFG_ERROR
Date
s
On Wed 27 Sep 2023 at 15:25, "Rong.Chen" <Rong.Chen@amlogic.com> wrote:

> From: Rong Chen <rong.chen@amlogic.com>
>
> Setting bit CMD_CFG_ERROR has non effects on previous controllers.

Which previous controllers ? v2, v3 ? Can you list the SoCs please ?

> However, it will cause an IRQ and stop working on latest controllers,

Isn't it desirable to stop on error ? seems like a sane thing to do.

> This bit is used for selecting SG LINK of data address.
> Don't set the bit CMD_CFG_ERROR anymore to resolve this issuse.

I'm not sure I understand the actual issue being resolved.
Could you provide more details please ?

>
> Therefore, remove this setting.
>
> Signed-off-by: Rong Chen <rong.chen@amlogic.com>
> ---
> drivers/mmc/host/meson-gx-mmc.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 9837dab096e6..c7c067b9415a 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -801,7 +801,6 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
>
> cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
> cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
> - cmd_cfg |= CMD_CFG_ERROR; /* stop in case of error */
>
> meson_mmc_set_response_bits(cmd, &cmd_cfg);

\
 
 \ /
  Last update: 2023-09-27 18:54    [W:0.061 / U:0.852 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site