lkml.org 
[lkml]   [2023]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] dt-bindings: mfd: x-powers,axp152: make interrupt optional for more chips
On Sun, 24 Sep 2023, Jernej Škrabec wrote:

> Dne torek, 19. september 2023 ob 12:39:12 CEST je Andre Przywara napisal(a):
> > All X-Powers PMICs described by this binding have an IRQ pin, and so
> > far (almost) all boards connected this to some NMI pin or GPIO on the SoC
> > they are connected to.
> > However we start to see boards that omit this connection, and technically
> > the IRQ pin is not essential to the basic PMIC operation.
> >
> > The existing Linux driver allows skipping the IRQ pin setup for two chips
> > already, so update the binding to also make the DT property optional for
> > the missing chip. And while we are at it, add the AXP313a to that list,
> > as they are actually boards out there not connecting the IRQ pin.
> >
> > This allows to have DTs correctly describing those boards not wiring up
> > the interrupt.
> >
> > Signed-off-by: Andre Przywara <andre.przywara@arm.com>
> > Acked-by: Conor Dooley <conor.dooley@microchip.com>
>
> Should I pick this patch through sunxi tree?

No thank you.

--
Lee Jones [李琼斯]

\
 
 \ /
  Last update: 2023-09-25 09:47    [W:0.042 / U:1.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site