Messages in this thread | | | Date | Sat, 23 Sep 2023 13:49:22 +0200 | Subject | Re: [PATCH v6 01/14] dt-bindings: usb: tps6598x: Add tps25750 | From | Krzysztof Kozlowski <> |
| |
On 23/09/2023 09:39, Abdel Alkuor wrote: > From: Abdel Alkuor <abdelalkuor@geotab.com> > > TPS25750 is USB TypeC PD controller which is a subset of TPS6598x. > > Signed-off-by: Abdel Alkuor <abdelalkuor@geotab.com> > --- > Changes in v6: > - Use reg property for patch address > Changes in v5: > - Add tps25750 bindings > > .../devicetree/bindings/usb/ti,tps6598x.yaml | 80 ++++++++++++++++++- > 1 file changed, 78 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml > index 5497a60cddbc..da299a2bb19e 100644 > --- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml > +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml > @@ -20,8 +20,7 @@ properties: > enum: > - ti,tps6598x > - apple,cd321x > - reg: > - maxItems: 1
reg must be defined in top-level.
https://elixir.bootlin.com/linux/v5.19-rc6/source/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml#L57
> + - ti,tps25750 > > wakeup-source: true > > @@ -32,10 +31,55 @@ properties: > items: > - const: irq > > + firmware-name: > + description: | > + Should contain the name of the default patch binary > + file located on the firmware search path which is > + used to switch the controller into APP mode. > + This is used when tps25750 doesn't have an EEPROM > + connected to it. > + maxItems: 1 > + > required: > - compatible > - reg > > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: ti,tps25750 > + then: > + properties: > + reg: > + maxItems: 2 > + > + reg-names: > + description: | > + The first reg is PD device address and the second > + reg is I2C slave address field in PBMs input data > + which is used as the device address when writing the > + patch for TPS25750. > + The patch address can be any value except 0x00, 0x20, > + 0x21, 0x22, and 0x23
Entire description is not suitable here, but should be used as description of items in reg: (instead of maxItems).
> + items: > + - const: main > + - const: patch-address > + > + connector: > + required: > + - data-role > + > + required: > + - connector > + - reg-names > + else: > + properties: > + reg: > + maxItems: 1 > + > +
Only one blank line.
Best regards, Krzysztof
| |