Messages in this thread Patch in this message | | | From | Lukasz Majewski <> | Subject | [PATCH v6 net-next 2/5] net: dsa: notify drivers of MAC address changes on user ports | Date | Fri, 22 Sep 2023 15:31:05 +0200 |
| |
From: Vladimir Oltean <vladimir.oltean@nxp.com>
In some cases, drivers may need to veto the changing of a MAC address on a user port. Such is the case with KSZ9477 when it offloads a HSR device, because it programs the MAC address of multiple ports to a shared hardware register. Those ports need to have equal MAC addresses for the lifetime of the HSR offload.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> --- Changes for v5: - New patch Changes for v6: - None --- include/net/dsa.h | 10 ++++++++++ net/dsa/slave.c | 7 +++++++ 2 files changed, 17 insertions(+)
diff --git a/include/net/dsa.h b/include/net/dsa.h index 426724808e76..d98439ea6146 100644 --- a/include/net/dsa.h +++ b/include/net/dsa.h @@ -969,6 +969,16 @@ struct dsa_switch_ops { struct phy_device *phy); void (*port_disable)(struct dsa_switch *ds, int port); + + /* + * Notification for MAC address changes on user ports. Drivers can + * currently only veto operations. They should not use the method to + * program the hardware, since the operation is not rolled back in case + * of other errors. + */ + int (*port_set_mac_address)(struct dsa_switch *ds, int port, + const unsigned char *addr); + /* * Compatibility between device trees defining multiple CPU ports and * drivers which are not OK to use by default the numerically smallest diff --git a/net/dsa/slave.c b/net/dsa/slave.c index 2b3d89b77121..4c3e502d7e16 100644 --- a/net/dsa/slave.c +++ b/net/dsa/slave.c @@ -457,6 +457,13 @@ static int dsa_slave_set_mac_address(struct net_device *dev, void *a) if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; + if (ds->ops->port_set_mac_address) { + err = ds->ops->port_set_mac_address(ds, dp->index, + addr->sa_data); + if (err) + return err; + } + /* If the port is down, the address isn't synced yet to hardware or * to the DSA master, so there is nothing to change. */ -- 2.20.1
| |