Messages in this thread Patch in this message | | | From | Rohit Agarwal <> | Subject | [PATCH 3/3] arm64: dts: qcom: sdx75-idp: Enable USB3 and PHY support | Date | Fri, 22 Sep 2023 17:20:34 +0530 |
| |
Enable the support for USB3 controller, QMP PHY and HS PHY on SDX75 IDP.
Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> --- arch/arm64/boot/dts/qcom/sdx75-idp.dts | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts index 10d1587..5f2ebe3 100644 --- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts @@ -250,6 +250,11 @@ stdout-path = "serial0:115200n8"; }; +&pm7550ba_eusb2_repeater { + vdd18-supply = <&vreg_l5b_1p776>; + vdd3-supply = <&vreg_l10b_3p08>; +}; + &qupv3_id_0 { status = "okay"; }; @@ -261,3 +266,27 @@ &uart1 { status = "okay"; }; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_hsphy { + vdd-supply = <&vreg_l4b_0p88>; + vdda12-supply = <&vreg_l1b_1p2>; + + phys = <&pm7550ba_eusb2_repeater>; + + status = "okay"; +}; + +&usb_qmpphy { + vdda-phy-supply = <&vreg_l4b_0p88>; + vdda-pll-supply = <&vreg_l1b_1p2>; + + status = "okay"; +}; -- 2.7.4
| |