lkml.org 
[lkml]   [2023]   [Sep]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] usb: xhci-plat: fix usb disconnect issue after s4
From
On 21.9.2023 4.58, Yinbo Zhu wrote:
>
>
> Friendly ping ?
>
>
> 在 2023/8/9 下午5:58, Yinbo Zhu 写道:
>> The xhci retaining bogus hardware states cause usb disconnect devices
>> connected before hibernation(s4) and refer to the commit 'f3d478858be
>> ("usb: ohci-platform: fix usb disconnect issue after s4")' which set
>> flag "hibernated" as true when resume-from-hibernation and that the
>> drivers will reset the hardware to get rid of any existing state and
>> make sure resume from hibernation re-enumerates everything for xhci.
>>
>> Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
>> ---
>> Change in v2:
>>         1. Add CONFIG_PM_SLEEP in xhci_plat_pm_ops that for fix
>>            compile issue when CONFIG_PM not enable.
>>
>>   drivers/usb/host/xhci-plat.c | 24 ++++++++++++++++++++----
>>   1 file changed, 20 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
>> index 28218c8f1837..112468fdcca2 100644
>> --- a/drivers/usb/host/xhci-plat.c
>> +++ b/drivers/usb/host/xhci-plat.c
>> @@ -451,7 +451,7 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev)
>>       return 0;
>>   }
>> -static int __maybe_unused xhci_plat_resume(struct device *dev)
>> +static int __maybe_unused xhci_plat_resume_common(struct device *dev, struct pm_message pmsg)
>>   {
>>       struct usb_hcd    *hcd = dev_get_drvdata(dev);
>>       struct xhci_hcd    *xhci = hcd_to_xhci(hcd);
>> @@ -466,7 +466,7 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
>>       if (ret)
>>           return ret;
>> -    ret = xhci_resume(xhci, PMSG_RESUME);
>> +    ret = xhci_resume(xhci, pmsg);
>>       if (ret)
>>           return ret;
>> @@ -477,6 +477,16 @@ static int __maybe_unused xhci_plat_resume(struct device *dev)
>>       return 0;
>>   }
>> +static int __maybe_unused xhci_plat_resume(struct device *dev)
>> +{
>> +    return xhci_plat_resume_common(dev, PMSG_RESUME);
>> +}
>> +
>> +static int __maybe_unused xhci_plat_restore(struct device *dev)
>> +{
>> +    return xhci_plat_resume_common(dev, PMSG_RESTORE);
>> +}
>> +
>>   static int __maybe_unused xhci_plat_runtime_suspend(struct device *dev)
>>   {
>>       struct usb_hcd  *hcd = dev_get_drvdata(dev);
>> @@ -499,8 +509,14 @@ static int __maybe_unused xhci_plat_runtime_resume(struct device *dev)
>>   }
>>   const struct dev_pm_ops xhci_plat_pm_ops = {
>> -    SET_SYSTEM_SLEEP_PM_OPS(xhci_plat_suspend, xhci_plat_resume)
>> -
>> +#ifdef CONFIG_PM_SLEEP
>> +    .suspend = xhci_plat_suspend,
>> +    .resume = xhci_plat_resume,
>> +    .freeze = xhci_plat_suspend,
>> +    .thaw = xhci_plat_resume,
>> +    .poweroff = xhci_plat_suspend,
>> +    .restore = xhci_plat_restore,
>> +#endif

How about using pm_ptr() and pm_sleep_ptr() macros instead of the #ifdef CONFIG_PM_SLEEP?
should be able to get rif of the __maybe_unused flags as well.

Thanks
-Mathias

\
 
 \ /
  Last update: 2023-09-21 22:29    [W:0.142 / U:0.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site