lkml.org 
[lkml]   [2023]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 00/13] imx8mp: first clock propagation attempt (for LVDS)
On Mon, Sep 18, 2023 at 07:59:16PM +0200, Benjamin Bara wrote:
> Hi Adam!
>
> On Mon, 18 Sept 2023 at 07:00, Adam Ford <aford173@gmail.com> wrote:
> > On Sun, Sep 17, 2023 at 3:40 PM Benjamin Bara <bbara93@gmail.com> wrote:
> > > The idea:
> > > Enable CLK_SET_RATE_PARENT, at least for media_disp2_pix and media_ldb.
> > > When this is done, ensure that the pll1443x can be re-configured,
> > > meaning it ensures that an already configured rate (crtc rate) is still
> > > supported when a second child requires a different rate (lvds rate). As
> >
> > Have you tested with the DSI as well? If memory servers, the DSI
> > clock and the LVDS clock are both clocked from the same video_pll. At
> > one time, I had done some experimentation with trying the DSI
> > connected to an HDMI bridge chip connected to a monitor and the LVDS
> > was connected to a display panel with a static resolution and refresh
> > rate. For my LVDS display, it needs 30MHz to display properly, but
> > various HDMI resolutions needed values that were not evenly divisible
> > by 30MHz which appeared to cause display sync issues when trying to
> > share a clock that was trying to dynamically adjust for two different
> > displays especially when trying to change the resoltuion of the HDMI
> > display to various values for different resolutions.
>
> Unfortunately I haven't. I think if you have the use case to support
> different "run-time-dynamic" (HDMI) rates in parallel with a static
> (LVDS) rate

If anything, LVDS is harder to deal with than HDMI. HDMI only has a
handful of clock rates (74.250, 148.5, 297 and 594MHz mostly) while LVDS
is more freeform.

We are more likely to change the rate on an HDMI device though, but a
rate change from 1080p to 720p would only require a divide by two (from
148.5 to 74.250) so fairly easy to do.

Maxime
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2023-09-19 10:57    [W:0.059 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site