lkml.org 
[lkml]   [2023]   [Sep]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 5/5] usb: typec: intel_pmc_mux: Configure Displayport Alternate mode 2.1
Date
Mux agent driver can configure cable details such as cable type and
cable speed received as a part of displayport configuration to support
Displayport Alternate mode 2.1.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
---
Changes in v4:
- No change.

Changes in v3:
- No change.

Changes in v2:
- No change.

drivers/usb/typec/mux/intel_pmc_mux.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)

diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index 60ed1f809130..233958084b43 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -191,6 +191,12 @@ static int hsl_orientation(struct pmc_usb_port *port)
return port->orientation - 1;
}

+static bool is_pmc_mux_tbt(struct acpi_device *adev)
+{
+ return acpi_dev_hid_uid_match(adev, "INTC1072", NULL) ||
+ acpi_dev_hid_uid_match(adev, "INTC1079", NULL);
+}
+
static int pmc_usb_send_command(struct intel_scu_ipc_dev *ipc, u8 *msg, u32 len)
{
u8 response[4];
@@ -293,6 +299,24 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
req.mode_data |= (state->mode - TYPEC_STATE_MODAL) <<
PMC_USB_ALTMODE_DP_MODE_SHIFT;

+ if (!is_pmc_mux_tbt(port->pmc->iom_adev)) {
+ u8 cable_speed = (data->conf & DP_CONF_SIGNALLING_MASK) >>
+ DP_CONF_SIGNALLING_SHIFT;
+
+ u8 cable_type = (data->conf & DP_CONF_CABLE_TYPE_MASK) >>
+ DP_CONF_CABLE_TYPE_SHIFT;
+
+ req.mode_data |= PMC_USB_ALTMODE_CABLE_SPD(cable_speed);
+
+ if (cable_type == DP_CONF_CABLE_TYPE_OPTICAL)
+ req.mode_data |= PMC_USB_ALTMODE_CABLE_TYPE;
+ else if (cable_type == DP_CONF_CABLE_TYPE_RE_TIMER)
+ req.mode_data |= PMC_USB_ALTMODE_ACTIVE_CABLE |
+ PMC_USB_ALTMODE_RETIMER_CABLE;
+ else if (cable_type == DP_CONF_CABLE_TYPE_RE_DRIVER)
+ req.mode_data |= PMC_USB_ALTMODE_ACTIVE_CABLE;
+ }
+
ret = pmc_usb_command(port, (void *)&req, sizeof(req));
if (ret)
return ret;
--
2.25.1
\
 
 \ /
  Last update: 2023-09-20 04:41    [W:0.144 / U:1.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site