lkml.org 
[lkml]   [2023]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC PATCH v2 3/9] drm/panel: nv3052c: Sleep for 150ms after reset
From


On 9/18/2023 5:58 AM, John Watts wrote:
> The current code waits after resets for 5 to 20 milliseconds.
> This is appropriate when resetting a sleeping panel, but an awake panel
> requires at least 120ms of waiting.
>
> Sleep for 150ms so the panel always completes it reset properly.
>
> Signed-off-by: John Watts <contact@jookia.org>

Hi John,

Just wondering, is there some context to this change? I.e., was this
made to fix a specific issue?

This seems like a pretty significant increase in wait time so, if it's
not a fix, I'm not sure if this would be an improvement on the current
behavior.

Thanks,

Jessica Zhang

> ---
> drivers/gpu/drm/panel/panel-newvision-nv3052c.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
> index 90dea21f9856..2526b123b1f5 100644
> --- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
> +++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
> @@ -258,7 +258,7 @@ static int nv3052c_prepare(struct drm_panel *panel)
> gpiod_set_value_cansleep(priv->reset_gpio, 1);
> usleep_range(10, 1000);
> gpiod_set_value_cansleep(priv->reset_gpio, 0);
> - usleep_range(5000, 20000);
> + msleep(150);
>
> for (i = 0; i < ARRAY_SIZE(nv3052c_panel_regs); i++) {
> err = mipi_dbi_command(dbi, nv3052c_panel_regs[i].cmd,
> --
> 2.42.0
>

\
 
 \ /
  Last update: 2023-09-18 22:20    [W:0.098 / U:0.784 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site