lkml.org 
[lkml]   [2023]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 08/17] pmdomain: qcom: Move Kconfig options to the pmdomain subsystem
Date
The Kconfig options belongs closer to the corresponding implementations,
hence let's move them from the soc subsystem to the pmdomain subsystem.

Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Andy Gross <agross@kernel.org>
Cc: <linux-arm-msm@vger.kernel.org>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
---
drivers/pmdomain/Kconfig | 1 +
drivers/pmdomain/qcom/Kconfig | 41 +++++++++++++++++++++++++++++++++++
drivers/soc/qcom/Kconfig | 37 -------------------------------
3 files changed, 42 insertions(+), 37 deletions(-)
create mode 100644 drivers/pmdomain/qcom/Kconfig

diff --git a/drivers/pmdomain/Kconfig b/drivers/pmdomain/Kconfig
index b1d9dc7d71e3..c91fdd40163a 100644
--- a/drivers/pmdomain/Kconfig
+++ b/drivers/pmdomain/Kconfig
@@ -7,5 +7,6 @@ source "drivers/pmdomain/apple/Kconfig"
source "drivers/pmdomain/bcm/Kconfig"
source "drivers/pmdomain/imx/Kconfig"
source "drivers/pmdomain/mediatek/Kconfig"
+source "drivers/pmdomain/qcom/Kconfig"

endmenu
diff --git a/drivers/pmdomain/qcom/Kconfig b/drivers/pmdomain/qcom/Kconfig
new file mode 100644
index 000000000000..3d3948eabef0
--- /dev/null
+++ b/drivers/pmdomain/qcom/Kconfig
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "Qualcomm PM Domains"
+
+config QCOM_CPR
+ tristate "QCOM Core Power Reduction (CPR) support"
+ depends on ARCH_QCOM && HAS_IOMEM
+ select PM_OPP
+ select REGMAP
+ help
+ Say Y here to enable support for the CPR hardware found on Qualcomm
+ SoCs like QCS404.
+
+ This driver populates CPU OPPs tables and makes adjustments to the
+ tables based on feedback from the CPR hardware. If you want to do
+ CPUfrequency scaling say Y here.
+
+ To compile this driver as a module, choose M here: the module will
+ be called qcom-cpr
+
+config QCOM_RPMHPD
+ tristate "Qualcomm RPMh Power domain driver"
+ depends on QCOM_RPMH && QCOM_COMMAND_DB
+ help
+ QCOM RPMh Power domain driver to support power-domains with
+ performance states. The driver communicates a performance state
+ value to RPMh which then translates it into corresponding voltage
+ for the voltage rail.
+
+config QCOM_RPMPD
+ tristate "Qualcomm RPM Power domain driver"
+ depends on PM && OF
+ depends on QCOM_SMD_RPM
+ select PM_GENERIC_DOMAINS
+ select PM_GENERIC_DOMAINS_OF
+ help
+ QCOM RPM Power domain driver to support power-domains with
+ performance states. The driver communicates a performance state
+ value to RPM which then translates it into corresponding voltage
+ for the voltage rail.
+
+endmenu
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index 715348869d04..b3634e10f6f5 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -26,22 +26,6 @@ config QCOM_COMMAND_DB
resource on a RPM-hardened platform must use this database to get
SoC specific identifier and information for the shared resources.

-config QCOM_CPR
- tristate "QCOM Core Power Reduction (CPR) support"
- depends on ARCH_QCOM && HAS_IOMEM
- select PM_OPP
- select REGMAP
- help
- Say Y here to enable support for the CPR hardware found on Qualcomm
- SoCs like QCS404.
-
- This driver populates CPU OPPs tables and makes adjustments to the
- tables based on feedback from the CPR hardware. If you want to do
- CPUfrequency scaling say Y here.
-
- To compile this driver as a module, choose M here: the module will
- be called qcom-cpr
-
config QCOM_GENI_SE
tristate "QCOM GENI Serial Engine Driver"
depends on ARCH_QCOM || COMPILE_TEST
@@ -157,27 +141,6 @@ config QCOM_RPMH
of hardware components aggregate requests for these resources and
help apply the aggregated state on the resource.

-config QCOM_RPMHPD
- tristate "Qualcomm RPMh Power domain driver"
- depends on QCOM_RPMH && QCOM_COMMAND_DB
- help
- QCOM RPMh Power domain driver to support power-domains with
- performance states. The driver communicates a performance state
- value to RPMh which then translates it into corresponding voltage
- for the voltage rail.
-
-config QCOM_RPMPD
- tristate "Qualcomm RPM Power domain driver"
- depends on PM && OF
- depends on QCOM_SMD_RPM
- select PM_GENERIC_DOMAINS
- select PM_GENERIC_DOMAINS_OF
- help
- QCOM RPM Power domain driver to support power-domains with
- performance states. The driver communicates a performance state
- value to RPM which then translates it into corresponding voltage
- for the voltage rail.
-
config QCOM_SMEM
tristate "Qualcomm Shared Memory Manager (SMEM)"
depends on ARCH_QCOM || COMPILE_TEST
--
2.34.1
\
 
 \ /
  Last update: 2023-09-15 11:24    [W:0.159 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site