lkml.org 
[lkml]   [2023]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v21 00/29] Add KVM LoongArch support
From
Date

在 2023/9/15 下午3:10, Huacai Chen 写道:
> Hi, Tianrui,
>
> On Fri, Sep 15, 2023 at 2:58 PM zhaotianrui <zhaotianrui@loongson.cn> wrote:
>>
>> 在 2023/9/15 下午12:11, Huacai Chen 写道:
>>> Hi, Tianrui,
>>>
>>> On Fri, Sep 15, 2023 at 9:50 AM Tianrui Zhao <zhaotianrui@loongson.cn> wrote:
>>>> This series adds KVM LoongArch support. Loongson 3A5000 supports hardware
>>>> assisted virtualization. With cpu virtualization, there are separate
>>>> hw-supported user mode and kernel mode in guest mode. With memory
>>>> virtualization, there are two-level hw mmu table for guest mode and host
>>>> mode. Also there is separate hw cpu timer with consant frequency in
>>>> guest mode, so that vm can migrate between hosts with different freq.
>>>> Currently, we are able to boot LoongArch Linux Guests.
>>>>
>>>> Few key aspects of KVM LoongArch added by this series are:
>>>> 1. Enable kvm hardware function when kvm module is loaded.
>>>> 2. Implement VM and vcpu related ioctl interface such as vcpu create,
>>>> vcpu run etc. GET_ONE_REG/SET_ONE_REG ioctl commands are use to
>>>> get general registers one by one.
>>>> 3. Hardware access about MMU, timer and csr are emulated in kernel.
>>>> 4. Hardwares such as mmio and iocsr device are emulated in user space
>>>> such as APIC, IPI, pci devices etc.
>>>>
>>>> The running environment of LoongArch virt machine:
>>>> 1. Cross tools for building kernel and uefi:
>>>> https://github.com/loongson/build-tools
>>>> 2. This series is based on the linux source code:
>>>> https://github.com/loongson/linux-loongarch-kvm
>>>> Build command:
>>>> git checkout kvm-loongarch
>>>> make ARCH=loongarch CROSS_COMPILE=loongarch64-unknown-linux-gnu- loongson3_defconfig
>>>> make ARCH=loongarch CROSS_COMPILE=loongarch64-unknown-linux-gnu-
>>>> 3. QEMU hypervisor with LoongArch supported:
>>>> https://github.com/loongson/qemu
>>>> Build command:
>>>> git checkout kvm-loongarch
>>>> ./configure --target-list="loongarch64-softmmu" --enable-kvm
>>>> make
>>> When I build qemu, I get:
>>> [3/964] Compiling C object
>>> libqemu-loongarch64-softmmu.fa.p/target_loongarch_loongarch-qmp-cmds.c.o
>>> FAILED: libqemu-loongarch64-softmmu.fa.p/target_loongarch_loongarch-qmp-cmds.c.o
>>> cc -Ilibqemu-loongarch64-softmmu.fa.p -I. -I.. -Itarget/loongarch
>>> -I../target/loongarch -Isubprojects/dtc/libfdt
>>> -I../subprojects/dtc/libfdt -Iqapi -Itrace c
>>> In file included from ../target/loongarch/loongarch-qmp-cmds.c:11:
>>> ../target/loongarch/cpu.h:351:14: error: duplicate member 'CSR_CPUID'
>>> 351 | uint64_t CSR_CPUID;
>>> | ^~~~~~~~~
>>> ninja: build stopped: subcommand failed.
>>> make[1]: *** [Makefile:162: run-ninja] Error 1
>>> make[1]: Leaving directory '/root/qemu/build'
>>> make: *** [GNUmakefile:11: all] Error 2
>>>
>>> Huacai
>> Sorry, I have submitted patch to fix this error, you could git pull to
>> update it.
> After git pull, I get a new error:
> [70/912] Compiling C object
> libqemu-loongarch64-softmmu.fa.p/accel_tcg_tcg-accel-ops-icount.c.o
> [71/912] Compiling C object
> libqemu-loongarch64-softmmu.fa.p/accel_tcg_tcg-accel-ops-rr.c.o
> [72/912] Linking target qemu-system-loongarch64
> FAILED: qemu-system-loongarch64
> cc -o qemu-system-loongarch64 libcommon.fa.p/hw_core_cpu-common.c.o
> libcommon.fa.p/hw_core_machine-smp.c.o
> libcommon.fa.p/gdbstub_syscalls.c.o libcommon.fap
> /usr/bin/ld: libqemu-loongarch64-softmmu.fa.p/accel_kvm_kvm-all.c.o:
> in function `kvm_init':
> /root/qemu/build/../accel/kvm/kvm-all.c:2525:(.text+0x66f4): undefined
> reference to `kvm_arch_get_default_type'
> collect2: error: ld returned 1 exit status
> ninja: build stopped: subcommand failed.
> make[1]: *** [Makefile:162: run-ninja] Error 1
> make[1]: Leaving directory '/root/qemu/build'
> make: *** [GNUmakefile:11: all] Error 2
>
> Huacai
Sorry, I have resolved this mistake and submit to the source, you could
update it.

Thanks
Tianrui Zhao
>
>> Thanks
>> Tianrui Zhao
>>>> 4. Uefi bios of LoongArch virt machine:
>>>> Link: https://github.com/tianocore/edk2-platforms/tree/master/Platform/Loongson/LoongArchQemuPkg#readme
>>>> 5. you can also access the binary files we have already build:
>>>> https://github.com/yangxiaojuan-loongson/qemu-binary
>>>> The command to boot loongarch virt machine:
>>>> $ qemu-system-loongarch64 -machine virt -m 4G -cpu la464 \
>>>> -smp 1 -bios QEMU_EFI.fd -kernel vmlinuz.efi -initrd ramdisk \
>>>> -serial stdio -monitor telnet:localhost:4495,server,nowait \
>>>> -append "root=/dev/ram rdinit=/sbin/init console=ttyS0,115200" \
>>>> --nographic
>>>>
>>>> Changes for v21:
>>>> 1. Remove unnecessary prefix '_' in some kvm function names.
>>>> 2. Replace check_vmid with check_vpid, and move the functions
>>>> to main.c.
>>>> 3. Re-order the file names and config names by alphabetical
>>>> in KVM makefile and Kconfig.
>>>> 4. Code clean up for KVM mmu and get,set gcsr and vcpu_arch
>>>> ioctl functions.
>>>>
>>>> changes for v20:
>>>> 1. Remove the binary code of virtualization instructions in
>>>> insn_def.h and csr_ops.S and directly use the default csrrd,
>>>> csrwr,csrxchg instructions. And let CONFIG_KVM depends on the
>>>> AS_HAS_LVZ_EXTENSION, so we should use the binutils that have
>>>> already supported them to compile the KVM. This can make our
>>>> LoongArch KVM codes more maintainable and easier.
>>>>
>>>> changes for v19:
>>>> 1. Use the common interface xfer_to_guest_mode_handle_work to
>>>> Check conditions before entering the guest.
>>>> 2. Add vcpu dirty ring support.
>>>>
>>>> changes for v18:
>>>> 1. Code cleanup for vcpu timer: remove unnecessary timer_period_ns,
>>>> timer_bias, timer_dyn_bias variables in kvm_vcpu_arch and rename
>>>> the stable_ktime_saved variable to expire.
>>>> 2. Change the value of KVM_ARCH_NR_OBJS_PER_MEMORY_CACHE to 40.
>>>>
>>>> changes for v17:
>>>> 1. Add CONFIG_AS_HAS_LVZ_EXTENSION config option which depends on
>>>> binutils that support LVZ assemble instruction.
>>>> 2. Change kvm mmu related functions, such as rename level2_ptw_pgd
>>>> to kvm_ptw_pgd, replace kvm_flush_range with kvm_ptw_pgd pagewalk
>>>> framework, replace kvm_arch.gpa_mm with kvm_arch.pgd, set
>>>> mark_page_dirty/kvm_set_pfn_dirty out of mmu_lock in kvm page fault
>>>> handling.
>>>> 3. Replace kvm_loongarch_interrupt with standard kvm_interrupt
>>>> when injecting IRQ.
>>>> 4. Replace vcpu_arch.last_exec_cpu with existing vcpu.cpu, remove
>>>> kvm_arch.online_vcpus and kvm_arch.is_migrating,
>>>> 5. Remove EXCCODE_TLBNR and EXCCODE_TLBNX in kvm exception table,
>>>> since NR/NX bit is not set in kvm page fault handling.
>>>>
>>>> Changes for v16:
>>>> 1. Free allocated memory of vmcs,kvm_loongarch_ops in kvm module init,
>>>> exit to avoid memory leak problem.
>>>> 2. Simplify some assemble codes in switch.S which are necessary to be
>>>> replaced with pseudo-instructions. And any other instructions do not need
>>>> to be replaced anymore.
>>>> 3. Add kvm_{save,restore}_guest_gprs macros to replace these ld.d,st.d
>>>> guest regs instructions when vcpu world switch.
>>>> 4. It is more secure to disable irq when flush guest tlb by gpa, so replace
>>>> preempt_disable with loacl_irq_save in kvm_flush_tlb_gpa.
>>>>
>>>> Changes for v15:
>>>> 1. Re-order some macros and variables in LoongArch kvm headers, put them
>>>> together which have the same meaning.
>>>> 2. Make some function definitions in one line, as it is not needed to split
>>>> them.
>>>> 3. Re-name some macros such as KVM_REG_LOONGARCH_GPR.
>>>>
>>>> Changes for v14:
>>>> 1. Remove the macro CONFIG_KVM_GENERIC_HARDWARE_ENABLING in
>>>> loongarch/kvm/main.c, as it is not useful.
>>>> 2. Add select KVM_GENERIC_HARDWARE_ENABLING in loongarch/kvm/Kconfig,
>>>> as it is used by virt/kvm.
>>>> 3. Fix the LoongArch KVM source link in MAINTAINERS.
>>>> 4. Improve LoongArch KVM documentation, such as add comment for
>>>> LoongArch kvm_regs.
>>>>
>>>> Changes for v13:
>>>> 1. Remove patch-28 "Implement probe virtualization when cpu init", as the
>>>> virtualization information about FPU,PMP,LSX in guest.options,options_dyn
>>>> is not used and the gcfg reg value can be read in kvm_hardware_enable, so
>>>> remove the previous cpu_probe_lvz function.
>>>> 2. Fix vcpu_enable_cap interface, it should return -EINVAL directly, as
>>>> FPU cap is enable by default, and do not support any other caps now.
>>>> 3. Simplify the jirl instruction with jr when without return addr,
>>>> simplify case HW0 ... HW7 statment in interrupt.c
>>>> 4. Rename host_stack,host_gp in kvm_vcpu_arch to host_sp,host_tp.
>>>> 5. Remove 'cpu' parameter in _kvm_check_requests, as 'cpu' is not used,
>>>> and remove 'cpu' parameter in kvm_check_vmid function, as it can get
>>>> cpu number by itself.
>>>>
>>>> Changes for v12:
>>>> 1. Improve the gcsr write/read/xchg interface to avoid the previous
>>>> instruction statment like parse_r and make the code easy understanding,
>>>> they are implemented in asm/insn-def.h and the instructions consistent
>>>> of "opcode" "rj" "rd" "simm14" arguments.
>>>> 2. Fix the maintainers list of LoongArch KVM.
>>>>
>>>> Changes for v11:
>>>> 1. Add maintainers for LoongArch KVM.
>>>>
>>>> Changes for v10:
>>>> 1. Fix grammatical problems in LoongArch documentation.
>>>> 2. It is not necessary to save or restore the LOONGARCH_CSR_PGD when
>>>> vcpu put and vcpu load, so we remove it.
>>>>
>>>> Changes for v9:
>>>> 1. Apply the new defined interrupt number macros in loongarch.h to kvm,
>>>> such as INT_SWI0, INT_HWI0, INT_TI, INT_IPI, etc. And remove the
>>>> previous unused macros.
>>>> 2. Remove unused variables in kvm_vcpu_arch, and reorder the variables
>>>> to make them more standard.
>>>>
>>>> Changes for v8:
>>>> 1. Adjust the cpu_data.guest.options structure, add the ases flag into
>>>> it, and remove the previous guest.ases. We do this to keep consistent
>>>> with host cpu_data.options structure.
>>>> 2. Remove the "#include <asm/kvm_host.h>" in some files which also
>>>> include the "<linux/kvm_host.h>". As linux/kvm_host.h already include
>>>> the asm/kvm_host.h.
>>>> 3. Fix some unstandard spelling and grammar errors in comments, and
>>>> improve a little code format to make it easier and standard.
>>>>
>>>> Changes for v7:
>>>> 1. Fix the kvm_save/restore_hw_gcsr compiling warnings reported by
>>>> kernel test robot. The report link is:
>>>> https://lore.kernel.org/oe-kbuild-all/202304131526.iXfLaVZc-lkp@intel.com/
>>>> 2. Fix loongarch kvm trace related compiling problems.
>>>>
>>>> Changes for v6:
>>>> 1. Fix the Documentation/virt/kvm/api.rst compile warning about
>>>> loongarch parts.
>>>>
>>>> Changes for v5:
>>>> 1. Implement get/set mp_state ioctl interface, and only the
>>>> KVM_MP_STATE_RUNNABLE state is supported now, and other states
>>>> will be completed in the future. The state is also used when vcpu
>>>> run idle instruction, if vcpu state is changed to RUNNABLE, the
>>>> vcpu will have the possibility to be woken up.
>>>> 2. Supplement kvm document about loongarch-specific part, such as add
>>>> api introduction for GET/SET_ONE_REG, GET/SET_FPU, GET/SET_MP_STATE,
>>>> etc.
>>>> 3. Improve the kvm_switch_to_guest function in switch.S, remove the
>>>> previous tmp,tmp1 arguments and replace it with t0,t1 reg.
>>>>
>>>> Changes for v4:
>>>> 1. Add a csr_need_update flag in _vcpu_put, as most csr registers keep
>>>> unchanged during process context switch, so we need not to update it
>>>> every time. We can do this only if the soft csr is different form hardware.
>>>> That is to say all of csrs should update after vcpu enter guest, as for
>>>> set_csr_ioctl, we have written soft csr to keep consistent with hardware.
>>>> 2. Improve get/set_csr_ioctl interface, we set SW or HW or INVALID flag
>>>> for all csrs according to it's features when kvm init. In get/set_csr_ioctl,
>>>> if csr is HW, we use gcsrrd/ gcsrwr instruction to access it, else if csr is
>>>> SW, we use software to emulate it, and others return false.
>>>> 3. Add set_hw_gcsr function in csr_ops.S, and it is used in set_csr_ioctl.
>>>> We have splited hw gcsr into three parts, so we can calculate the code offset
>>>> by gcsrid and jump here to run the gcsrwr instruction. We use this function to
>>>> make the code easier and avoid to use the previous SET_HW_GCSR(XXX) interface.
>>>> 4. Improve kvm mmu functions, such as flush page table and make clean page table
>>>> interface.
>>>>
>>>> Changes for v3:
>>>> 1. Remove the vpid array list in kvm_vcpu_arch and use a vpid variable here,
>>>> because a vpid will never be recycled if a vCPU migrates from physical CPU A
>>>> to B and back to A.
>>>> 2. Make some constant variables in kvm_context to global such as vpid_mask,
>>>> guest_eentry, enter_guest, etc.
>>>> 3. Add some new tracepoints, such as kvm_trace_idle, kvm_trace_cache,
>>>> kvm_trace_gspr, etc.
>>>> 4. There are some duplicate codes in kvm_handle_exit and kvm_vcpu_run,
>>>> so we move it to a new function kvm_pre_enter_guest.
>>>> 5. Change the RESUME_HOST, RESUME_GUEST value, return 1 for resume guest
>>>> and "<= 0" for resume host.
>>>> 6. Fcsr and fpu registers are saved/restored together.
>>>>
>>>> Changes for v2:
>>>> 1. Seprate the original patch-01 and patch-03 into small patches, and the
>>>> patches mainly contain kvm module init, module exit, vcpu create, vcpu run,
>>>> etc.
>>>> 2. Remove the original KVM_{GET,SET}_CSRS ioctl in the kvm uapi header,
>>>> and we use the common KVM_{GET,SET}_ONE_REG to access register.
>>>> 3. Use BIT(x) to replace the "1 << n_bits" statement.
>>>>
>>>> Tianrui Zhao (29):
>>>> LoongArch: KVM: Add kvm related header files
>>>> LoongArch: KVM: Implement kvm module related interface
>>>> LoongArch: KVM: Implement kvm hardware enable, disable interface
>>>> LoongArch: KVM: Implement VM related functions
>>>> LoongArch: KVM: Add vcpu related header files
>>>> LoongArch: KVM: Implement vcpu create and destroy interface
>>>> LoongArch: KVM: Implement vcpu run interface
>>>> LoongArch: KVM: Implement vcpu handle exit interface
>>>> LoongArch: KVM: Implement vcpu get, vcpu set registers
>>>> LoongArch: KVM: Implement vcpu ENABLE_CAP ioctl interface
>>>> LoongArch: KVM: Implement fpu related operations for vcpu
>>>> LoongArch: KVM: Implement vcpu interrupt operations
>>>> LoongArch: KVM: Implement misc vcpu related interfaces
>>>> LoongArch: KVM: Implement vcpu load and vcpu put operations
>>>> LoongArch: KVM: Implement vcpu status description
>>>> LoongArch: KVM: Implement virtual machine tlb operations
>>>> LoongArch: KVM: Implement vcpu timer operations
>>>> LoongArch: KVM: Implement kvm mmu operations
>>>> LoongArch: KVM: Implement handle csr exception
>>>> LoongArch: KVM: Implement handle iocsr exception
>>>> LoongArch: KVM: Implement handle idle exception
>>>> LoongArch: KVM: Implement handle gspr exception
>>>> LoongArch: KVM: Implement handle mmio exception
>>>> LoongArch: KVM: Implement handle fpu exception
>>>> LoongArch: KVM: Implement kvm exception vector
>>>> LoongArch: KVM: Implement vcpu world switch
>>>> LoongArch: KVM: Enable kvm config and add the makefile
>>>> LoongArch: KVM: Supplement kvm document about LoongArch-specific part
>>>> LoongArch: KVM: Add maintainers for LoongArch KVM
>>>>
>>>> Documentation/virt/kvm/api.rst | 70 +-
>>>> MAINTAINERS | 12 +
>>>> arch/loongarch/Kbuild | 1 +
>>>> arch/loongarch/Kconfig | 3 +
>>>> arch/loongarch/configs/loongson3_defconfig | 2 +
>>>> arch/loongarch/include/asm/inst.h | 16 +
>>>> arch/loongarch/include/asm/kvm_csr.h | 221 +++++
>>>> arch/loongarch/include/asm/kvm_host.h | 245 ++++++
>>>> arch/loongarch/include/asm/kvm_mmu.h | 138 +++
>>>> arch/loongarch/include/asm/kvm_types.h | 11 +
>>>> arch/loongarch/include/asm/kvm_vcpu.h | 107 +++
>>>> arch/loongarch/include/asm/loongarch.h | 19 +-
>>>> arch/loongarch/include/uapi/asm/kvm.h | 108 +++
>>>> arch/loongarch/kernel/asm-offsets.c | 32 +
>>>> arch/loongarch/kvm/Kconfig | 45 +
>>>> arch/loongarch/kvm/Makefile | 20 +
>>>> arch/loongarch/kvm/exit.c | 711 ++++++++++++++++
>>>> arch/loongarch/kvm/interrupt.c | 185 ++++
>>>> arch/loongarch/kvm/main.c | 429 ++++++++++
>>>> arch/loongarch/kvm/mmu.c | 922 ++++++++++++++++++++
>>>> arch/loongarch/kvm/switch.S | 255 ++++++
>>>> arch/loongarch/kvm/timer.c | 200 +++++
>>>> arch/loongarch/kvm/tlb.c | 34 +
>>>> arch/loongarch/kvm/trace.h | 166 ++++
>>>> arch/loongarch/kvm/vcpu.c | 940 +++++++++++++++++++++
>>>> arch/loongarch/kvm/vm.c | 92 ++
>>>> include/uapi/linux/kvm.h | 9 +
>>>> 27 files changed, 4979 insertions(+), 14 deletions(-)
>>>> create mode 100644 arch/loongarch/include/asm/kvm_csr.h
>>>> create mode 100644 arch/loongarch/include/asm/kvm_host.h
>>>> create mode 100644 arch/loongarch/include/asm/kvm_mmu.h
>>>> create mode 100644 arch/loongarch/include/asm/kvm_types.h
>>>> create mode 100644 arch/loongarch/include/asm/kvm_vcpu.h
>>>> create mode 100644 arch/loongarch/include/uapi/asm/kvm.h
>>>> create mode 100644 arch/loongarch/kvm/Kconfig
>>>> create mode 100644 arch/loongarch/kvm/Makefile
>>>> create mode 100644 arch/loongarch/kvm/exit.c
>>>> create mode 100644 arch/loongarch/kvm/interrupt.c
>>>> create mode 100644 arch/loongarch/kvm/main.c
>>>> create mode 100644 arch/loongarch/kvm/mmu.c
>>>> create mode 100644 arch/loongarch/kvm/switch.S
>>>> create mode 100644 arch/loongarch/kvm/timer.c
>>>> create mode 100644 arch/loongarch/kvm/tlb.c
>>>> create mode 100644 arch/loongarch/kvm/trace.h
>>>> create mode 100644 arch/loongarch/kvm/vcpu.c
>>>> create mode 100644 arch/loongarch/kvm/vm.c
>>>>
>>>> --
>>>> 2.39.1
>>>>

\
 
 \ /
  Last update: 2023-09-15 09:54    [W:0.109 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site