lkml.org 
[lkml]   [2023]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] rtc: brcmstb-waketimer: support level alarm_irq
From
On 8/31/23 16:27, Florian Fainelli wrote:
> On 8/30/23 15:47, Doug Berger wrote:
>> Some devices (e.g. BCM72112) use an alarm_irq interrupt that is
>> connected to a level interrupt controller rather than an edge
>> interrupt controller. In this case, the interrupt cannot be left
>> enabled by the irq handler while preserving the hardware wake-up
>> signal on wake capable devices or an interrupt storm will occur.
>>
>> The alarm_expired flag is introduced to allow the disabling of
>> the interrupt when an alarm expires and to support balancing the
>> calls to disable_irq() and enable_irq() in accordance with the
>> existing design.
>>
>> Fixes: 24304a87158a ("rtc: brcmstb-waketimer: allow use as non-wake
>> alarm")
>> Signed-off-by: Doug Berger <opendmb@gmail.com>
>
> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>

Alexandre, any chance you could apply this patch? Thanks!
--
Florian

[unhandled content-type:application/pkcs7-signature]
\
 
 \ /
  Last update: 2023-09-15 20:55    [W:0.078 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site