lkml.org 
[lkml]   [2023]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [REBASE PATCH v5 15/17] firmware: scm: Modify only the download bits in TCSR register
From

On 9/11/2023 4:23 PM, Mukesh Ojha wrote:
> Crashdump collection is based on the DLOAD bit of TCSR register.
> To retain other bits, we read the register and modify only the
> DLOAD bit as the other bits have their own significance.
>
> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
> Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> # IPQ9574 and IPQ5332
> ---
> drivers/firmware/qcom_scm.c | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
> index 321133f0950d..5cacae63ee2a 100644
> --- a/drivers/firmware/qcom_scm.c
> +++ b/drivers/firmware/qcom_scm.c
> @@ -5,6 +5,8 @@
> #include <linux/platform_device.h>
> #include <linux/init.h>
> #include <linux/interrupt.h>
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> #include <linux/completion.h>
> #include <linux/cpumask.h>
> #include <linux/export.h>
> @@ -26,6 +28,14 @@
> static bool download_mode = IS_ENABLED(CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT);
> module_param(download_mode, bool, 0);
>
> +#define SCM_HAS_CORE_CLK BIT(0)
> +#define SCM_HAS_IFACE_CLK BIT(1)
> +#define SCM_HAS_BUS_CLK BIT(2)


Is this intentional to add these macros back again?


> +
> +#define QCOM_DLOAD_MASK GENMASK(5, 4)
> +#define QCOM_DLOAD_FULLDUMP 0x1
> +#define QCOM_DLOAD_NODUMP 0x0
> +
> struct qcom_scm {
> struct device *dev;
> struct clk *core_clk;
> @@ -440,6 +450,7 @@ static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
>
> static void qcom_scm_set_download_mode(bool enable)
> {
> + u32 val = enable ? QCOM_DLOAD_FULLDUMP : QCOM_DLOAD_NODUMP;
> bool avail;
> int ret = 0;
>
> @@ -449,8 +460,9 @@ static void qcom_scm_set_download_mode(bool enable)
> if (avail) {
> ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
> } else if (__scm->dload_mode_addr) {
> - ret = qcom_scm_io_writel(__scm->dload_mode_addr,
> - enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
> + ret = qcom_scm_io_update_field(__scm->dload_mode_addr,
> + QCOM_DLOAD_MASK,
> + FIELD_PREP(QCOM_DLOAD_MASK, val));
> } else {
> dev_err(__scm->dev,
> "No available mechanism for setting download mode\n");

\
 
 \ /
  Last update: 2023-09-12 00:10    [W:0.316 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site