lkml.org 
[lkml]   [2023]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 10/10] ARM: dts: stm32: add RNG node for STM32MP13x platforms
Date
The RNG on STM32MP13 offers upgrades like customization of its
configuration and the conditional reset.

The hardware RNG should be managed in the secure world for but it
is supported on Linux. Therefore, is it not default enabled.

Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
---
arch/arm/boot/dts/st/stm32mp131.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index ac90fcbf0c09..39db82b782eb 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -1220,6 +1220,14 @@ mdma: dma-controller@58000000 {
dma-requests = <48>;
};

+ rng: rng@54004000 {
+ compatible = "st,stm32mp13-rng";
+ reg = <0x54004000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ status = "disabled";
+ };
+
fmc: memory-controller@58002000 {
compatible = "st,stm32mp1-fmc2-ebi";
reg = <0x58002000 0x1000>;
--
2.25.1
\
 
 \ /
  Last update: 2023-09-12 00:02    [W:0.239 / U:0.920 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site