Messages in this thread | | | Date | Wed, 9 Aug 2023 14:16:57 -0700 | Subject | Re: [PATCH] serial: core: Revert port_id use | From | Guenter Roeck <> |
| |
On 8/8/23 22:26, Tony Lindgren wrote: > Hi, > > * Guenter Roeck <linux@roeck-us.net> [230806 13:19]: >> On Sun, Aug 06, 2023 at 09:20:50AM +0300, Tony Lindgren wrote: >>> Guenter reports boot issues with duplicate sysfs entries for multiport >>> drivers. Let's go back to using port->line for now to fix the regression. >>> >>> With this change, the serial core port device names are not correct for the >>> hardware specific 8250 single port drivers, but that's a cosmetic issue for >>> now. >>> >>> Fixes: d962de6ae51f ("serial: core: Fix serial core port id to not use port->line") >>> Reported-by: Guenter Roeck <groeck7@gmail.com> >>> Signed-off-by: Tony Lindgren <tony@atomide.com> >> >> Tested-by: Guenter Roeck <linux@roeck-us.net> > > Thanks for testing. > > Guenter, care to also test the patch below on top of this fix and > see if things still behave for you? > > I'll send a proper patch assuming things test fine. >
Patch below works for me.
Tested-by: Guenter Roeck <linux@roeck-us.net>
Guenter
> Regagrds, > > Tony > > 8< -------------------- > diff --git a/drivers/tty/serial/serial_base.h b/drivers/tty/serial/serial_base.h > --- a/drivers/tty/serial/serial_base.h > +++ b/drivers/tty/serial/serial_base.h > @@ -16,6 +16,7 @@ struct device; > > struct serial_ctrl_device { > struct device dev; > + struct ida ida; > }; > > struct serial_port_device { > diff --git a/drivers/tty/serial/serial_base_bus.c b/drivers/tty/serial/serial_base_bus.c > --- a/drivers/tty/serial/serial_base_bus.c > +++ b/drivers/tty/serial/serial_base_bus.c > @@ -10,6 +10,7 @@ > > #include <linux/container_of.h> > #include <linux/device.h> > +#include <linux/idr.h> > #include <linux/module.h> > #include <linux/serial_core.h> > #include <linux/slab.h> > @@ -112,6 +113,8 @@ struct serial_ctrl_device *serial_base_ctrl_add(struct uart_port *port, > if (!ctrl_dev) > return ERR_PTR(-ENOMEM); > > + ida_init(&ctrl_dev->ida); > + > err = serial_base_device_init(port, &ctrl_dev->dev, > parent, &serial_ctrl_type, > serial_base_ctrl_release, > @@ -142,16 +145,31 @@ struct serial_port_device *serial_base_port_add(struct uart_port *port, > struct serial_ctrl_device *ctrl_dev) > { > struct serial_port_device *port_dev; > + unsigned int min = 0, max = ~0U; > int err; > > port_dev = kzalloc(sizeof(*port_dev), GFP_KERNEL); > if (!port_dev) > return ERR_PTR(-ENOMEM); > > + /* Device driver specified port_id vs automatic assignment? */ > + if (port->port_id) { > + min = port->port_id; > + max = port->port_id; > + } > + > + err = ida_alloc_range(&ctrl_dev->ida, min, max, GFP_KERNEL); > + if (err < 0) { > + kfree(port_dev); > + return ERR_PTR(err); > + } > + > + port->port_id = err; > + > err = serial_base_device_init(port, &port_dev->dev, > &ctrl_dev->dev, &serial_port_type, > serial_base_port_release, > - port->ctrl_id, port->line); > + port->ctrl_id, port->port_id); > if (err) > goto err_put_device; > > @@ -165,16 +183,24 @@ struct serial_port_device *serial_base_port_add(struct uart_port *port, > > err_put_device: > put_device(&port_dev->dev); > + ida_free(&ctrl_dev->ida, port->port_id); > > return ERR_PTR(err); > } > > void serial_base_port_device_remove(struct serial_port_device *port_dev) > { > + struct serial_ctrl_device *ctrl_dev; > + struct device *parent; > + > if (!port_dev) > return; > > + parent = port_dev->dev.parent; > + ctrl_dev = to_serial_base_ctrl_device(parent); > + > device_del(&port_dev->dev); > + ida_free(&ctrl_dev->ida, port_dev->port->port_id); > put_device(&port_dev->dev); > } >
| |