Messages in this thread Patch in this message | | | From | Bryan O'Donoghue <> | Subject | [PATCH v2 3/6] arm64: dts: qcom: apq8016-sbc: Set ov5640 assigned-clock | Date | Wed, 9 Aug 2023 21:23:40 +0100 |
| |
The driver for the ov5640 doesn't do a set-rate, instead it expects the clock to already be set at an appropriate rate.
Similarly the yaml for ov5640 doesn't understand clock-frequency. Convert from clock-rate to assigned-clock and assigned-clock-rate to remediate.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- arch/arm64/boot/dts/qcom/apq8016-sbc.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts index 0481a4a82090a..ada0777567623 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts @@ -280,7 +280,8 @@ camera_rear@3b { clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; clock-names = "xclk"; - clock-frequency = <23880000>; + assigned-clocks = <&gcc GCC_CAMSS_MCLK0_CLK>; + assigned-clock-rates = <23880000>; DOVDD-supply = <&camera_vdddo_1v8>; AVDD-supply = <&camera_vdda_2v8>; -- 2.39.2
| |