lkml.org 
[lkml]   [2023]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 0/9] Add pmics supported in Qualcomm's SDX75 platform
From

On 8/7/2023 5:48 PM, Rohit Agarwal wrote:
> Hi,
>
> Changes in v2:
> - Added compatible for pm7550ba for eusb2 repeater and used it in DT.
> - Addressed some minor comments from Konrad to add fixes tag, labels
> and update the labels
>
> This series add support of pmics that are found in SDX75 platform and
> add the corresponding regulators in the IDP platform as well.
> It also parallely updates the pmic found in SDX65 to PM7250b and add pinctrl
> support for the same pmic chip.
> This series is based on the new header inclusion[1] and movement of the
> regulators level from rpmpd to rpmhpd[2].
> This series can be picked after successfully picking [2] and [3] as [1] has
> already been applied.
>
> [1] https://lore.kernel.org/all/1689744162-9421-1-git-send-email-quic_rohiagar@quicinc.com/
> [2] https://lore.kernel.org/all/1690781104-2290-1-git-send-email-quic_rohiagar@quicinc.com/
> [3] https://lore.kernel.org/all/1690461813-22564-1-git-send-email-quic_rohiagar@quicinc.com/
>
> Thanks,
> Rohit.
Sorry for the spam please ignore this. Will resend version 2.

Thanks,
Rohit.
>
> Rohit Agarwal (9):
> dt-bindings: phy: qcom,snps-eusb2-repeater: Add compatible for
> PM7550BA
> arm64: dts: qcom: sdx75: Add spmi node
> arm64: dts: qcom: Add pinctrl gpio support for pm7250b
> arm64: dts: qcom: Add pm7550ba PMIC dtsi
> arm64: dts: qcom: Add pmx75 PMIC dtsi
> ARM: dts: qcom: sdx65-mtp: Update the pmic used in sdx65
> arm64: dts: qcom: sdx75-idp: Add pmics supported in SDX75
> arm64: dts: qcom: sdx75: Add rpmhpd node
> arm64: dts: qcom: sdx75-idp: Add regulator nodes
>
> .../bindings/phy/qcom,snps-eusb2-repeater.yaml | 7 +-
> arch/arm/boot/dts/qcom/qcom-sdx65-mtp.dts | 2 +-
> arch/arm64/boot/dts/qcom/pm7250b.dtsi | 10 +
> arch/arm64/boot/dts/qcom/pm7550ba.dtsi | 70 +++++++
> arch/arm64/boot/dts/qcom/pmx75.dtsi | 64 ++++++
> arch/arm64/boot/dts/qcom/sdx75-idp.dts | 230 +++++++++++++++++++++
> arch/arm64/boot/dts/qcom/sdx75.dtsi | 74 +++++++
> 7 files changed, 455 insertions(+), 2 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/pm7550ba.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/pmx75.dtsi
>

\
 
 \ /
  Last update: 2023-08-07 14:23    [W:0.081 / U:0.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site