lkml.org 
[lkml]   [2023]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v9 04/10] serial: sc16is7xx: refactor GPIO controller registration
On Fri, Aug 04, 2023 at 10:15:54AM -0400, Hugo Villeneuve wrote:
> On Fri, 4 Aug 2023 15:14:18 +0200
> Greg KH <gregkh@linuxfoundation.org> wrote:
>
> > On Thu, Aug 03, 2023 at 12:14:49PM -0400, Hugo Villeneuve wrote:
> > > On Mon, 31 Jul 2023 17:55:42 +0200
> > > Greg KH <gregkh@linuxfoundation.org> wrote:
> > >
> > > > On Tue, Jul 25, 2023 at 10:23:36AM -0400, Hugo Villeneuve wrote:
> > > > > From: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > > > >
> > > > > In preparation for upcoming patch "fix regression with GPIO
> > > > > configuration". To facilitate review and make code more modular.
> > > >
> > > > I would much rather the issue be fixed _before_ the code is refactored,
> > > > unless it is impossible to fix it without the refactor?
> > >
> > > Hi Greg,
> > > normally I would agree, but the refactor in this case helps a lot to
> > > address some issues raised by you and Andy in V7 of this series.
> > >
> > > Maybe I could merge it with the actual patch "fix regression with GPIO
> > > configuration"?
> >
> > Sure.
>
> Hi Greg,
> will do.
>
>
> > > > > Cc: <stable@vger.kernel.org> # 6.1.x
> > > >
> > > > What commit id does this fix?
> > >
> > > It doesn't fix anything, but I tought that I needed this tag since
> > > this patch is a prerequisite for the next patch in the series, which
> > > would be applied to stable kernels. I will remove this tag (assuming
> > > the patch stays as it is, depending on your answer to the above
> > > question).
> > >
> > >
> > > > > Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
> > > > > Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com>
> > > > > Tested-by: Lech Perczak <lech.perczak@camlingroup.com>
> > > > > ---
> > > > > drivers/tty/serial/sc16is7xx.c | 40 ++++++++++++++++++++--------------
> > > > > 1 file changed, 24 insertions(+), 16 deletions(-)
> > > > >
> > > > > diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
> > > > > index 32d43d00a583..5b0aeef9d534 100644
> > > > > --- a/drivers/tty/serial/sc16is7xx.c
> > > > > +++ b/drivers/tty/serial/sc16is7xx.c
> > > > > @@ -332,6 +332,7 @@ struct sc16is7xx_one {
> > > > >
> > > > > struct sc16is7xx_port {
> > > > > const struct sc16is7xx_devtype *devtype;
> > > > > + struct device *dev;
> > > >
> > > > Why is this pointer needed?
> > > >
> > > > Why is it grabbed and yet the reference count is never incremented? Who
> > > > owns the reference count and when will it go away?
> > > >
> > > > And what device is this? The parent? Current device? What type of
> > > > device is it? And why is it needed?
> > > >
> > > > Using "raw" devices is almost never something a driver should do, they
> > > > are only passed into functions by the driver core, but then the driver
> > > > should instantly turn them into the "real" structure.
> > >
> > > We already discussed that a lot in previous versions (v7)... I am
> > > trying my best to modify the code to address your concerns, but I am
> > > not fully understanding what you mean about raw devices, and you didn't
> > > answer some of my previous questions/interrogations in v7 about that.
> >
> > I don't have time to answer all questions, sorry.
> >
> > Please help review submitted patches to reduce my load and allow me to
> > answer other stuff :)
>
> Ok.
>
>
> > > So, in the new function that I
> > > need to implement, sc16is7xx_setup_gpio_chip(), I absolutely need to use
> > > a raw device to read a device tree property and to set
> > > s->gpio.parent:
> > >
> > > count = device_property_count_u32(dev, ...
> > > ...
> > > s->gpio.parent = dev;
> > >
> > > Do we agree on that?
> >
> > Yes, but what type of parent is that?
>
> I am confused by your question. I do not understand why the type of
> parent matters... And what do you call the parent: s, s->gpio or
> s->gpio.parent?
>
> For me, the way I understand it, the only question that matters is how I
> can extract the raw device structure pointer from maybe "struct
> sc16is7xx_port" or some other structure, and then use it in my
> new function...
>
> I should not have put "s->gpio.parent = dev" in the example, I think it
> just complexifies things. Lets start over with a more simple example and
> only:
>
> count = device_property_count_u32(dev, ...
>
>
> > > Then, how do I pass this raw device to the
> > > device_property_count_u32() function and to the s->gpio.parent
> > > assignment?
> > >
> > > Should I modify sc16is7xx_setup_gpio_chip() like so:
> > >
> > > static int sc16is7xx_setup_gpio_chip(struct sc16is7xx_port *s)
> > > {
> > > struct device *dev = &s->p[0].port.dev;
> > >
> > > count = device_property_count_u32(dev, ...
> > > ...
> > > s->gpio.parent = dev;
> >
> > Again, what is the real type of that parent? It's a port, right, so
> > pass in the port to this function and then do the "take the struct
> > device of the port" at that point in time.
>
> With the simplified example, is the following ok:
>
> static int sc16is7xx_setup_gpio_chip(struct sc16is7xx_port *s)
> {
> struct device *dev = &s->p[0].port.dev;
>
> count = device_property_count_u32(dev, ...
> ...
> }
>
> If not, please indicate how you would do it with an actual example...

At this point, after reviewing 500+ patches today, I really have no
idea, my brain is fried. Do what you think is right here and submit a
new series and I'll be glad to review it.

thanks,

greg k-h

\
 
 \ /
  Last update: 2023-08-04 17:10    [W:0.061 / U:0.444 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site