lkml.org 
[lkml]   [2023]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] serial: core: Fix kmemleak issue for serial core device remove
On Fri, Aug 04, 2023 at 12:21:05PM +0300, Tony Lindgren wrote:
> * Jiri Slaby <jirislaby@kernel.org> [230804 09:16]:
> > On 04. 08. 23, 11:09, Tony Lindgren wrote:
> > > Kmemleak reports issues for serial8250 ports after the hardware specific
> > > driver takes over on boot as noted by Tomi.
> > >
> > > The kerneldoc for device_initialize() says we must call device_put()
> > > after calling device_initialize(). We are calling device_put() on the
> > > error path, but are missing it from the device remove path. This causes
> > > release() to never get called for the devices on remove.
> > >
> > > Let's add the missing put_device() calls for both serial ctrl and
> > > port devices.
> > >
> > > Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM")
> > > Reported-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
> > > Signed-off-by: Tony Lindgren <tony@atomide.com>
> > > ---
> > > drivers/tty/serial/serial_base_bus.c | 2 ++
> > > 1 file changed, 2 insertions(+)
> > >
> > > diff --git a/drivers/tty/serial/serial_base_bus.c b/drivers/tty/serial/serial_base_bus.c
> > > --- a/drivers/tty/serial/serial_base_bus.c
> > > +++ b/drivers/tty/serial/serial_base_bus.c
> > > @@ -99,6 +99,7 @@ void serial_base_ctrl_device_remove(struct serial_ctrl_device *ctrl_dev)
> > > return;
> > > device_del(&ctrl_dev->dev);
> > > + put_device(&ctrl_dev->dev);
> > > }
> > > struct serial_ctrl_device *serial_base_ctrl_add(struct uart_port *port,
> > > @@ -174,6 +175,7 @@ void serial_base_port_device_remove(struct serial_port_device *port_dev)
> > > return;
> > > device_del(&port_dev->dev);
> > > + put_device(&port_dev->dev);
> >
> > I didn't check the code, but device_unregister()?
>
> I thought about that as it does the same, but since we're not calling
> device_register() I felt it would be and unpaired call. No objections to
> changing to use device_unregister() naturally if folks prefer that.

This is fine as device_register() isn't happening, thanks.

greg k-h

\
 
 \ /
  Last update: 2023-08-04 15:12    [W:0.039 / U:3.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site