lkml.org 
[lkml]   [2023]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/2] media: i2c: ds90ub9x3: Fix use of uninitialized variables
From
On 04/08/2023 00:46, Laurent Pinchart wrote:
> Hi Tomi,
>
> Thank you for the patch.
>
> On Thu, Aug 03, 2023 at 11:41:38AM +0300, Tomi Valkeinen wrote:
>> smatch reports some uninitialized variables:
>>
>> drivers/media/i2c/ds90ub913.c:481 ub913_log_status() error: uninitialized symbol 'v1'.
>> drivers/media/i2c/ds90ub913.c:481 ub913_log_status() error: uninitialized symbol 'v2'.
>> drivers/media/i2c/ds90ub953.c:655 ub953_log_status() error: uninitialized symbol 'gpio_local_data'.
>> drivers/media/i2c/ds90ub953.c:655 ub953_log_status() error: uninitialized symbol 'gpio_input_ctrl'.
>> drivers/media/i2c/ds90ub953.c:655 ub953_log_status() error: uninitialized symbol 'gpio_pin_sts'.
>>
>> These are used only for printing debug information, and the use of an
>> uninitialized variable only happens if an i2c transaction has failed,
>> which will print an error. Thus, fix the errors just by initializing the
>> variables to 0.
>>
>> Fixes: 6363db1c9d45 ("media: i2c: add DS90UB953 driver")
>> Fixes: c158d0d4ff15 ("media: i2c: add DS90UB913 driver")
>> Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
>> Closes: https://lore.kernel.org/all/8d6daeb1-b62a-bbb2-b840-8759c84f2085@xs4all.nl/
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
>> ---
>> drivers/media/i2c/ds90ub913.c | 2 +-
>> drivers/media/i2c/ds90ub953.c | 6 +++---
>> 2 files changed, 4 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/media/i2c/ds90ub913.c b/drivers/media/i2c/ds90ub913.c
>> index 80d9cf6dd945..b2115e3519e2 100644
>> --- a/drivers/media/i2c/ds90ub913.c
>> +++ b/drivers/media/i2c/ds90ub913.c
>> @@ -469,7 +469,7 @@ static int ub913_log_status(struct v4l2_subdev *sd)
>> {
>> struct ub913_data *priv = sd_to_ub913(sd);
>> struct device *dev = &priv->client->dev;
>> - u8 v = 0, v1, v2;
>> + u8 v = 0, v1 = 0, v2 = 0;
>
> This seems to work around the lack of error checking when calling

Yes.

> ub913_read(). Wouldn't it be better to check for errors there ? Or,
> because this is ub913_log_status(), do you consider that we can print an
> invalid CRC errors count, given that the ub913_read() function will have
> printed an error message before ?

Yes, that was my thinking. Adding proper error handling would complicate
the function (more visibly so in ub953 and ub960, which have more
printing done), and what would be the benefit? Not much, in my opinion.
If the i2c transactions start to fail, we're in a bad situation anyway
(and, as you mention, ub913_read() will print errors).

However, I guess the "benefit" depends on the use a bit. If log status
is used as a debug aid, I think my reasoning is fine. But if it's used
by some automated script, to collect data, it may be more difficult for
the script to detect that an error has happened in the log status.

That said, I have to say this ignore-errors code somewhat bugs me, so
maybe I'll improve the log-status functions later. But I think these are
acceptable fixes to get rid of the smatch errors.

Tomi

\
 
 \ /
  Last update: 2023-08-04 07:50    [W:0.082 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site