lkml.org 
[lkml]   [2023]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 1/3] mm: add functions folio_in_range() and folio_within_vma()
From
On 04/08/2023 00:15, Yin, Fengwei wrote:
>
>
> On 8/3/2023 9:20 PM, Ryan Roberts wrote:
>> On 03/08/2023 11:48, Yin Fengwei wrote:
>>>
>>>
>>> On 8/3/23 17:58, Ryan Roberts wrote:
>>>> On 28/07/2023 08:09, Yin Fengwei wrote:
>>>>> It will be used to check whether the folio is mapped to specific
>>>>> VMA and whether the mapping address of folio is in the range.
>>>>>
>>>>> Also a helper function folio_within_vma() to check whether folio
>>>>> is in the range of vma based on folio_in_range().
>>>>>
>>>>> Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
>>>>> ---
>>>>> mm/internal.h | 69 +++++++++++++++++++++++++++++++++++++++++++++++++++
>>>>> 1 file changed, 69 insertions(+)
>>>>>
>>>>> diff --git a/mm/internal.h b/mm/internal.h
>>>>> index 5a03bc4782a2..63de32154a48 100644
>>>>> --- a/mm/internal.h
>>>>> +++ b/mm/internal.h
>>>>> @@ -585,6 +585,75 @@ extern long faultin_vma_page_range(struct vm_area_struct *vma,
>>>>> bool write, int *locked);
>>>>> extern bool mlock_future_ok(struct mm_struct *mm, unsigned long flags,
>>>>> unsigned long bytes);
>>>>> +
>>>>
>>>> Hi Yin,
>>>>
>>>> I wanted to take a step back and consolidate my concerns about this function. I
>>>> should say that my understanding of the pgoff and index stuff is shaky and I
>>>> could therefore be wrong about some of this; if this is the case, then sorry for
>>>> the noise! But something about this function doesn't smell right to me, so I
>>>> figure its better to raise it...
>>> No worries. And thank you for looking at the code ans share the comments.
>>> That helps me a lot. Really appreciate it.
>>>
>>>>
>>>>> +/*
>>>>> + * Check whether the folio is in specific range
>>>>
>>>> What exactly is the function trying to do? I *think* the intention is to figure
>>>> out if a folio is fully and contiguously mapped within a range of virtual
>>>> addresses belonging to a specific virtual address space? And I assume you want
>>>> the answer to be precise? I'm assuming 'yes' for the below.
>>>>
>>>> I think the only way to do this is to actually check each PTE. And that causes a
>>>> problem, because a folio can straddle multiple PTE tables, which causes PTL
>>>> locking issues, and means having just a *pte pointer is insufficient if we need
>>>> to traverse multiple pte tables. So perhaps you need to allow for a false
>>>> negative in the case that the folio is not contained within a single pte table.
>>> Let's check the users of this function first:
>>> mlock/munlock: Needs only care whether the folio is in the range of VM_LOCKED VMA
>>> madvise: Needs to check whether the folio is in the range of VMA and
>>> range [start, end).
>>
>> Sure but those 2 ranges (the vma and the user-supplied range) are known to
>> intersect, right? So really there is only one range of interest; the
>> intersection. I would argue that should be done in a higher level wrapper, and
>> is not part of the core primitive to work out if a folio is mapped to a
>> particular range of virtual addresses.
>>> This range is from user space. It could contain
>>> VMA range (in this case, we only need to check VMA range) or is contained
>>> by VMA range.
>>>
>>> So we check:
>>> 1. Whether the folio is in the range.
>>>
>>> To do this, we need to first check whether the folio->index is in the
>>> VMA range. If not, we know the folio is not in VMA range. Just return false
>>> without further check.
>>
>> Right, so if the check fails, the folio is definitely not mapped by the vma, but
>> if it passes, it *might* be. Further checks are required. So why is this useful?
>> Why not just do the check that gives you the precise answer and skip this?
> What check can give precise answer? I don't think checking PTE is right at this
> stage. For following case (assume the folio is mapped in same page table and just
> care about the VMA2 range):
>
> |-----------vma1-----------|------------vma2---------|
> |-------folio-----|
>
> How can we tell whether the folio is in the range of VMA2 by just checking PTE?
> And in this case, why not bail out if we see folio is out range of VMA2?
>
>
> So only need to check PTE if we are sure the folio is in the range of VMA2:
> |-----------vma1-----------|------------vma2---------|
> |-------folio-----|
>
>>
>>>
>>> Then, we will check whether the folio is in the range which is defined as
>>> [max(start, vma->vm_start), min(end, vma->vm_end)).
>>
>> As par above comment, I would personally factor this out of the primitive.
>>
>>>
>>>
>>> This is the version in RFC as I was not aware of mremap case and forgot the
>>> page cache case. So if no mremap with an anonymous folio, this check is enough.
>>> But we need to add PTE check for mremap and page cache cases.
>>>
>>> 2. Check PTE for mremap in middle of large folio and page cache
>>> If the folio is normal 4K and if the folio is in the range, it's not possible
>>> the folio is partially mapped to two different VMA. So we are sure this folio
>>> is in the range.
>>
>> But you test for small folio and exit early without checking the PTE. Given the
>> index check only told you that the folio *might be* mapped, I don't see how you
>> can return true at this point for a small folio, without looking at the PTE?
> Yes. We can do this. You can check the discussion on the RFC version. I did move
> the normal 4K folio check out of this function. Yu and Huge suggested to just ignore
> the normal 4K as this API can' handle it.
>
> The thing changed from RFC is that we need to check PTE here. I tried to avoid to
> check PTE even for normal 4K folio.

I'll go read the RFC. I've made my point; if you and others are convinced this
is correct, then fair enough.

>
>>
>> folio->index is just the page offset within the file it maps (or the (original)
>> VA/PAGE_SIZE for anon memory - I think?). And vma->vm_pgoff is the page offset
>> within the file that the vma starts at. So you could have a folio that contains
>> the contents of 1 file and a vma that maps another file, and the folio's index
>> might fall within the VMA, but it doesn't mean the folio is mapped by the vma;
>> its a different file.
>>
>> Or perhaps there is an assumption in the function's spec that the folio is known
>> to have at least one page mapped in the vma? That would change things... but you
>> should make that very clear in the spec. And in that case, you can move the
>> small folio check to the start and return true immediately.
> Yes. "At least one page mapped in VMA" is assumption here. I will make it clear in
> the comment.
>
>
> Regards
> Yin, Fengwei
>
>>
>>>
>>> Currently, check PTE didn't handle the case you mentioned. But my plan is
>>> checking whether the folio is mapped cross page table (by checking whether
>>> the folio start vaddr and end vaddr has same value for low aligned to PMD_SIZE).
>>> If it cross, I will treat it as out of VMA range. Otherwise, we can reuse
>>> current check because we know the PTE pointer is always valid.
>>>
>>> Obviously, the PTE checking needs hold pte lock as you pointed out.
>>>
>>>
>>> My understanding:
>>> pgoff is important if we have folio and VMA and want to know the virtual address of
>>> the folio mapped to. Like first, check whether pgoff of folio belongs to VMA, then get
>>> vaddr by:
>>> addr = vma->vm_start + ((pgoff - vma->vm_pgoff) << PAGE_SHIFT);
>>> rmap_walk() also depends on pgoff. You can check the vma_address() and rmap_walk()
>>> implementation.
>>
>> Yes but the rmap is only traversing vmas that are already known to map the same
>> file that the folio contains pages for. (See rmap_walk_file(): it grabs the
>> "mapping" from the folio, then traverses the list of vmas within the range of
>> interest "vma_interval_tree_foreach"). Its a bit more complicated for anon
>> memory but I think the princple is the same.
>>
>>>
>>>>
>>>>> + *
>>>>> + * First, check whether the folio is in the range of vma.
>>>>> + * Then, check whether the folio is mapped to the range of [start, end].
>>>>> + * In the end, check whether the folio is fully mapped to the range.
>>>>> + *
>>>>> + * @pte page table pointer will be checked whether the large folio
>>>>> + * is fully mapped to. Currently, if mremap in the middle of
>>>>> + * large folio, the large folio could be mapped to to different
>>>>> + * VMA and address check can't identify this situation.
>>>>> + */
>>>>> +static inline bool
>>>>> +folio_in_range(struct folio *folio, struct vm_area_struct *vma,
>>>>> + unsigned long start, unsigned long end, pte_t *pte)
>>>>
>>>> The prototype looks odd to me; Fundamentally it seems to me that you need the
>>>> folio, start and end virtual addresses (the range you want to check that it is
>>>> in), the pte pointer and the virtual address that the pte represents. That
>>>> virtual address allows you to figure out the offset between the pa and va. Then
>>>> you can look at all the ptes to figure out if they reference the folio's pfns,
>>>> and use the va to pa mapping info to figure out if its within the specified range.
>>>>
>>>> I don't really understand why the vma is useful.
>>>>
>>>>> +{
>>>>> + pte_t ptent;
>>>>> + unsigned long i, nr = folio_nr_pages(folio);
>>>>> + pgoff_t pgoff, addr;
>>>>> + unsigned long vma_pglen = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
>>>>> +
>>>>> + VM_WARN_ON_FOLIO(folio_test_ksm(folio), folio);
>>>>> +
>>>>> + if (start < vma->vm_start)
>>>>> + start = vma->vm_start;
>>>>> + if (end > vma->vm_end)
>>>>> + end = vma->vm_end;
>>>>> +
>>>>> + pgoff = folio_pgoff(folio);
>>>>> + /* if folio start address is not in vma range */
>>>>> + if (pgoff < vma->vm_pgoff || pgoff > vma->vm_pgoff + vma_pglen)
>>>>> + return false;
>>>>
>>>> Why is this pgoff calculation helpful? Surely it's only useful if the folio
>>>> belongs to the same file that the vma is mapping? Otherwise the folio's pgoff
>>>> might be referring to a completely different file than the vma's vm_pgoff. So
>>>> you will get spurious results.
>>>>
>>>>> +
>>>>> + addr = vma->vm_start + ((pgoff - vma->vm_pgoff) << PAGE_SHIFT);
>>>>> + if (addr < start || end - addr < folio_size(folio))
>>>>> + return false;
>>>>> +
>>>>> + /* not necessary to check pte for none large folio */
>>>>> + if (!folio_test_large(folio))
>>>>> + return true;
>>>>
>>>> I don't understand why you don't need to check the pte for a small folio? As
>>>> above, if the folio doesn't belong to the file that the vma is mapping the above
>>>> checks seem wrong and you can't conclude that the folio is mapped in the range
>>>> without looking at the pte?
>>>>
>>>>> +
>>>>> + if (!pte)
>>>>> + return false;
>>>>> +
>>>>> + /* check whether parameter pte is associated with folio */
>>>>> + ptent = ptep_get(pte);
>>>>> + if (pte_none(ptent) || !pte_present(ptent) ||
>>>>> + pte_pfn(ptent) - folio_pfn(folio) >= nr)
>>>>> + return false;
>>>>> +
>>>>> + pte -= pte_pfn(ptent) - folio_pfn(folio);
>>>>
>>>> I think this could wander off the front or back of the pte table into arbitrary
>>>> memory if the folio is strddling multiple pte tables.
>>>>
>>>>> + for (i = 0; i < nr; i++, pte++) {
>>>>> + ptent = ptep_get(pte);
>>>>> +
>>>>> + if (pte_none(ptent) || !pte_present(ptent) ||
>>>>> + pte_pfn(ptent) - folio_pfn(folio) >= nr)
>>>>
>>>> Doesn't !pte_present() also cover pte_none()? So I think the pte_none() check is
>>>> redundant?
>>> I think you are right. pte_none() can be removed here.
>>>
>>>
>>> Regards
>>> Yin, Fengwei
>>>
>>>>
>>>> Thanks,
>>>> Ryan
>>>>
>>>>
>>>>> + return false;
>>>>> + }
>>>>> +
>>>>> + return true;
>>>>> +}
>>>>> +
>>>>> +static inline bool
>>>>> +folio_within_vma(struct folio *folio, struct vm_area_struct *vma, pte_t *pte)
>>>>> +{
>>>>> + return folio_in_range(folio, vma, vma->vm_start, vma->vm_end, pte);
>>>>> +}
>>>>> +
>>>>> /*
>>>>> * mlock_vma_folio() and munlock_vma_folio():
>>>>> * should be called with vma's mmap_lock held for read or write,
>>>>
>>

\
 
 \ /
  Last update: 2023-08-04 10:47    [W:0.044 / U:1.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site