lkml.org 
[lkml]   [2023]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v9 3/5] arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node
From


On 03-Aug-23 13:34, Jayesh Choudhary wrote:
> From: Rahul T R <r-ravikumar@ti.com>
>
> Add DSS and DP-bridge node for J784S4 SoC. DSS IP in J784S4 is
> same as DSS IP in J721E, so same compatible is being used.
> The DP is Cadence MHDP8546.
DP-bridge

>
> Signed-off-by: Rahul T R <r-ravikumar@ti.com>
> [j-choudhary@ti.com: move dss & mhdp node together in main, fix dss node]
> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>

Given that you make appropriate changes with properties in this patch,
wrt patches 4/5 and 5/5,

Reviewed-by: Aradhya Bhatia <a-bhatia1@ti.com>

> ---
> arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 63 ++++++++++++++++++++++
> 1 file changed, 63 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> index 446d7efa715f..824312b9ef9f 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> @@ -1741,4 +1741,67 @@ c71_3: dsp@67800000 {
> resets = <&k3_reset 40 1>;
> firmware-name = "j784s4-c71_3-fw";
> };
> +
> + mhdp: bridge@a000000 {
> + compatible = "ti,j721e-mhdp8546";
> + reg = <0x0 0xa000000 0x0 0x30a00>,
> + <0x0 0x4f40000 0x0 0x20>;
> + reg-names = "mhdptx", "j721e-intg";
> + clocks = <&k3_clks 217 11>;
> + interrupt-parent = <&gic500>;
> + interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>;
> + power-domains = <&k3_pds 217 TI_SCI_PD_EXCLUSIVE>;
> + status = "disabled";
> +
> + dp0_ports: ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + dss: dss@4a00000 {
> + compatible = "ti,j721e-dss";
> + reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */
> + <0x00 0x04a10000 0x00 0x10000>, /* common_s0*/
> + <0x00 0x04b00000 0x00 0x10000>, /* common_s1*/
> + <0x00 0x04b10000 0x00 0x10000>, /* common_s2*/
> + <0x00 0x04a20000 0x00 0x10000>, /* vidl1 */
> + <0x00 0x04a30000 0x00 0x10000>, /* vidl2 */
> + <0x00 0x04a50000 0x00 0x10000>, /* vid1 */
> + <0x00 0x04a60000 0x00 0x10000>, /* vid2 */
> + <0x00 0x04a70000 0x00 0x10000>, /* ovr1 */
> + <0x00 0x04a90000 0x00 0x10000>, /* ovr2 */
> + <0x00 0x04ab0000 0x00 0x10000>, /* ovr3 */
> + <0x00 0x04ad0000 0x00 0x10000>, /* ovr4 */
> + <0x00 0x04a80000 0x00 0x10000>, /* vp1 */
> + <0x00 0x04aa0000 0x00 0x10000>, /* vp1 */
> + <0x00 0x04ac0000 0x00 0x10000>, /* vp1 */
> + <0x00 0x04ae0000 0x00 0x10000>, /* vp4 */
> + <0x00 0x04af0000 0x00 0x10000>; /* wb */
> + reg-names = "common_m", "common_s0",
> + "common_s1", "common_s2",
> + "vidl1", "vidl2","vid1","vid2",
> + "ovr1", "ovr2", "ovr3", "ovr4",
> + "vp1", "vp2", "vp3", "vp4",
> + "wb";
> + clocks = <&k3_clks 218 0>,
> + <&k3_clks 218 2>,
> + <&k3_clks 218 5>,
> + <&k3_clks 218 14>,
> + <&k3_clks 218 18>;
> + clock-names = "fck", "vp1", "vp2", "vp3", "vp4";
> + power-domains = <&k3_pds 218 TI_SCI_PD_EXCLUSIVE>;
> + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "common_m",
> + "common_s0",
> + "common_s1",
> + "common_s2";
> + status = "disabled";
> +
> + dss_ports: ports {
> + };
> + };
> };

\
 
 \ /
  Last update: 2023-08-04 21:34    [W:0.984 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site