lkml.org 
[lkml]   [2023]   [Aug]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] iocost_monitor: print vrate inuse along with base_vrate
Date
From: Chengming Zhou <zhouchengming@bytedance.com>

The real vrate iocost inuse is not base_vrate, but the atomic vtime_rate.
We need iocost_monitor tool to display this real vrate that iocost use,
to check if the boosted compensated vrate is normal.

Effect after change:

nvme0n1 RUN per=50.0ms cur_per=172116.580:v1040587.433 busy= +0 \
vrate=135.00%:270.00% params=ssd_dfl(CQ)
^
|
this is real vrate inuse

Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
---
tools/cgroup/iocost_monitor.py | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/tools/cgroup/iocost_monitor.py b/tools/cgroup/iocost_monitor.py
index 7aa076cb559e..52ae9d1595b2 100644
--- a/tools/cgroup/iocost_monitor.py
+++ b/tools/cgroup/iocost_monitor.py
@@ -100,6 +100,7 @@ class IocStat:
self.period_at = ioc.period_at.value_() / 1_000_000
self.vperiod_at = ioc.period_at_vtime.value_() / VTIME_PER_SEC
self.vrate_pct = ioc.vtime_base_rate.value_() * 100 / VTIME_PER_USEC
+ self.ivrate_pct = ioc.vtime_rate.counter.value_() * 100 / VTIME_PER_USEC
self.busy_level = ioc.busy_level.value_()
self.autop_idx = ioc.autop_idx.value_()
self.user_cost_model = ioc.user_cost_model.value_()
@@ -119,7 +120,9 @@ class IocStat:
'period_at' : self.period_at,
'period_vtime_at' : self.vperiod_at,
'busy_level' : self.busy_level,
- 'vrate_pct' : self.vrate_pct, }
+ 'vrate_pct' : self.vrate_pct,
+ 'ivrate_pct' : self.ivrate_pct,
+ }

def table_preamble_str(self):
state = ('RUN' if self.running else 'IDLE') if self.enabled else 'OFF'
@@ -127,7 +130,7 @@ class IocStat:
f'per={self.period_ms}ms ' \
f'cur_per={self.period_at:.3f}:v{self.vperiod_at:.3f} ' \
f'busy={self.busy_level:+3} ' \
- f'vrate={self.vrate_pct:6.2f}% ' \
+ f'vrate={self.vrate_pct:6.2f}%:{self.ivrate_pct:6.2f}% ' \
f'params={self.autop_name}'
if self.user_cost_model or self.user_qos_params:
output += f'({"C" if self.user_cost_model else ""}{"Q" if self.user_qos_params else ""})'
--
2.41.0
\
 
 \ /
  Last update: 2023-08-04 08:53    [W:0.037 / U:0.460 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site