lkml.org 
[lkml]   [2023]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 1/3] dt-bindings: hwmon: Add Infineon TDA38640
Hi

On Thu, 31 Aug 2023 at 21:24, Conor Dooley <conor@kernel.org> wrote:
>
> On Thu, Aug 31, 2023 at 12:49:32AM +0530, Naresh Solanki wrote:
> > Hi
> >
> > On Wed, 30 Aug 2023 at 21:02, Conor Dooley <conor@kernel.org> wrote:
> > > On Wed, Aug 30, 2023 at 12:36:16PM +0200, Naresh Solanki wrote:
>
> > > > + Indicates that the chip ENABLE pin is at fixed level or left
> > > > + unconnected(has internal pull-down).
> > >
> > > Maybe you've already been over this, but if the pin is called "enable"
> > > why not use the same wording in the property?
> > EN & ENABLE is used interchangeably in the datasheet.
>
> Maybe we can go 1 for 2 in terms of consistency then, rather than 0 for
> 2.
Ack.
Will go for EN as that's what is mentioned as pin name in datasheet.
>
> > Just to keep property name short I use EN.
>
> Consistency & readability trump brevity. Please pick one term, or point
> out that this is called two things in the datasheet.
Sure will pick one. i.e., EN. EN is pin name & description as mentioned in
datasheet is 'Enable pin to turn on and off the IC'

Regards,
Naresh

>

\
 
 \ /
  Last update: 2023-08-31 20:42    [W:0.045 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site