lkml.org 
[lkml]   [2023]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V5 5/6] scsi: ufs: qcom: Refactor ufs_qcom_cfg_timers function.
From


On 8/28/2023 1:47 PM, Manivannan Sadhasivam wrote:
> On Wed, Aug 23, 2023 at 09:14:12PM +0530, Nitin Rawat wrote:
>> This change configures SYS1CLK_1US_REG for pre scale up condition. Also
>> move ufs_qcom_cfg_timers from clk scaling post change ops to clk scaling
>> pre change ops to align with the hardware specification.
>>
>
> Same comment as previous patch. This looks like a bug fix to me.
>
> Also, this patch should be splitted into 2. SYS1CLK_1US_REG and
> ufs_qcom_cfg_timers change.
>
> - Mani
>


In this patch we are trying to refactor ufs_qcom_cfg_timers function and
added extra argument to this function. Since it is just refactoring
code, IMO it's better to not split in to 2 patches. We will update the
commit message to explain more in detail

--Nitin

>> Co-developed-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
>> Signed-off-by: Naveen Kumar Goud Arepalli <quic_narepall@quicinc.com>
>> Signed-off-by: Nitin Rawat <quic_nitirawa@quicinc.com>
>> ---
>> drivers/ufs/host/ufs-qcom.c | 61 +++++++++++++++++++++++++------------
>> 1 file changed, 42 insertions(+), 19 deletions(-)
>>
>> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
>> index 491c0173603e..82cf3ac4193a 100644
>> --- a/drivers/ufs/host/ufs-qcom.c
>> +++ b/drivers/ufs/host/ufs-qcom.c
>> @@ -533,7 +533,8 @@ static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba,
>> * Return: zero for success and non-zero in case of a failure.
>> */
>> static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
>> - u32 hs, u32 rate, bool update_link_startup_timer)
>> + u32 hs, u32 rate, bool link_startup,
>> + bool is_pre_scale_up)
>> {
>> struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>> struct ufs_clk_info *clki;
>> @@ -564,11 +565,16 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
>> /*
>> * The Qunipro controller does not use following registers:
>> * SYS1CLK_1US_REG, TX_SYMBOL_CLK_1US_REG, CLK_NS_REG &
>> - * UFS_REG_PA_LINK_STARTUP_TIMER
>> - * But UTP controller uses SYS1CLK_1US_REG register for Interrupt
>> - * Aggregation logic.
>> - */
>> - if (ufs_qcom_cap_qunipro(host) && !ufshcd_is_intr_aggr_allowed(hba))
>> + * UFS_REG_PA_LINK_STARTUP_TIMER.
>> + * However UTP controller uses SYS1CLK_1US_REG register for Interrupt
>> + * Aggregation logic and Auto hibern8 logic.
>> + * It is mandatory to write SYS1CLK_1US_REG register on UFS host
>> + * controller V4.0.0 onwards.
>> + */
>> + if (ufs_qcom_cap_qunipro(host) &&
>> + !(ufshcd_is_intr_aggr_allowed(hba) ||
>> + ufshcd_is_auto_hibern8_supported(hba) ||
>> + host->hw_ver.major >= 4))
>> return 0;
>>
>> if (gear == 0) {
>> @@ -577,8 +583,14 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
>> }
>>
>> list_for_each_entry(clki, &hba->clk_list_head, list) {
>> - if (!strcmp(clki->name, "core_clk"))
>> - core_clk_rate = clk_get_rate(clki->clk);
>> + if (!strcmp(clki->name, "core_clk")) {
>> + if (is_pre_scale_up)
>> + core_clk_rate = clki->max_freq;
>> + else
>> + core_clk_rate = clk_get_rate(clki->clk);
>> + break;
>> + }
>> +
>> }
>>
>> /* If frequency is smaller than 1MHz, set to 1MHz */
>> @@ -658,7 +670,7 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
>> mb();
>> }
>>
>> - if (update_link_startup_timer && host->hw_ver.major != 0x5) {
>> + if (link_startup && host->hw_ver.major != 0x5) {
>> ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100),
>> REG_UFS_CFG0);
>> /*
>> @@ -719,7 +731,7 @@ static int ufs_qcom_link_startup_notify(struct ufs_hba *hba,
>> switch (status) {
>> case PRE_CHANGE:
>> if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE,
>> - 0, true)) {
>> + 0, true, false)) {
>> dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
>> __func__);
>> return -EINVAL;
>> @@ -968,7 +980,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
>> case POST_CHANGE:
>> if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx,
>> dev_req_params->pwr_rx,
>> - dev_req_params->hs_rate, false)) {
>> + dev_req_params->hs_rate, false, false)) {
>> dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n",
>> __func__);
>> /*
>> @@ -1401,11 +1413,24 @@ static int ufs_qcom_set_core_clk_ctrl(struct ufs_hba *hba,
>> static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba)
>> {
>> struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>> + struct ufs_pa_layer_attr *attr = &host->dev_req_params;
>> + int err;
>>
>> if (!ufs_qcom_cap_qunipro(host))
>> - return 0;
>> + goto out;
>> +
>> + if (attr) {
>> + err = ufs_qcom_cfg_timers(hba, attr->gear_rx,
>> + attr->pwr_rx, attr->hs_rate,
>> + false, true);
>> + if (err)
>> + dev_err(hba->dev, "%s ufs cfg timer failed\n",
>> + __func__);
>> + }
>>
>> - return ufs_qcom_cfg_core_clk_ctrl(hba);
>> + err = ufs_qcom_cfg_core_clk_ctrl(hba);
>> +out:
>> + return err;
>> }
>>
>> static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba)
>> @@ -1441,6 +1466,7 @@ static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba)
>> static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
>> {
>> struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>> + struct ufs_pa_layer_attr *attr = &host->dev_req_params;
>> struct list_head *head = &hba->clk_list_head;
>> struct ufs_clk_info *clki;
>> u32 curr_freq = 0;
>> @@ -1449,6 +1475,9 @@ static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba)
>> if (!ufs_qcom_cap_qunipro(host))
>> return 0;
>>
>> + if (attr)
>> + ufs_qcom_cfg_timers(hba, attr->gear_rx, attr->pwr_rx,
>> + attr->hs_rate, false, false);
>>
>> list_for_each_entry(clki, head, list) {
>> if (!IS_ERR_OR_NULL(clki->clk) &&
>> @@ -1480,7 +1509,6 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
>> bool scale_up, enum ufs_notify_change_status status)
>> {
>> struct ufs_qcom_host *host = ufshcd_get_variant(hba);
>> - struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params;
>> int err = 0;
>>
>> /* check the host controller state before sending hibern8 cmd */
>> @@ -1510,11 +1538,6 @@ static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba,
>> return err;
>> }
>>
>> - ufs_qcom_cfg_timers(hba,
>> - dev_req_params->gear_rx,
>> - dev_req_params->pwr_rx,
>> - dev_req_params->hs_rate,
>> - false);
>> ufs_qcom_icc_update_bw(host);
>> ufshcd_uic_hibern8_exit(hba);
>> }
>> --
>> 2.17.1
>>
>

\
 
 \ /
  Last update: 2023-08-31 11:19    [W:0.107 / U:2.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site