lkml.org 
[lkml]   [2023]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH V6 0/5] Add camera clock controller support for SM8550
From


On 7/7/2023 9:27 AM, Jagadeesh Kona wrote:
> Add bindings, driver and devicetree node for camera clock controller on
> SM8550.
>
> Changes in v6:
> - Updated parent map and frequency table of cam_cc_xo_clk_src to use
> active only source P_BI_TCXO_AO instead of P_BI_TCXO
>
> Changes in v5:
> - Added clk_lucid_ole_pll_configure() to configure lucid ole PLL's
> - Used module_platform_driver() instead of subsys_initcall()
> - Fixed overloading .l config with CAL_L and RINGOSC_CAL_L fields
>
> Changes in v4:
> - Dropped the extra patches added in v2, since the review comments on
> v3 recommended an alternate solution
>
> Changes in v3:
> - Squashed 2 extra patches added in v2 into single patch as per review
> comments
>
> Changes in v2:
> - Took care of review comments from v1
> + Removed new YAML file and reused SM8450 CAMCC YAML file for SM8550
> + Sorted the PLL names in proper order
> + Updated all PLL configurations to lower case hex
> + Reused evo ops instead of adding new ops for ole pll
> + Moved few clocks to separate patch to fix patch too long error
> + Padded non-zero address part to 8 hex digits in DT change
> - Added 2 extra patches updating .l config value across chipsets to
> include CAL_L and RINGOSC_CAL_L fields and removed setting CAL_L
> field explicitly in clk_lucid_evo_pll_configure().
>
> v1:
> - Initial CAMCC changes for SM8550
>
> Previous series:
> v5 - https://patchwork.kernel.org/project/linux-clk/list/?series=759863
> v4 - https://patchwork.kernel.org/project/linux-clk/list/?series=755683
> v3 - https://patchwork.kernel.org/project/linux-clk/list/?series=753150
> v2 - https://patchwork.kernel.org/project/linux-clk/list/?series=751058
> v1 - https://patchwork.kernel.org/project/linux-clk/list/?series=749294
>
> Jagadeesh Kona (5):
> dt-bindings: clock: qcom: Add SM8550 camera clock controller
> clk: qcom: clk-alpha-pll: Add support for lucid ole pll configure
> clk: qcom: camcc-sm8550: Add camera clock controller driver for SM8550
> clk: qcom: camcc-sm8550: Add support for qdss, sleep and xo clocks
> arm64: dts: qcom: sm8550: Add camera clock controller
>
> .../bindings/clock/qcom,sm8450-camcc.yaml | 8 +-
> arch/arm64/boot/dts/qcom/sm8550.dtsi | 15 +
> drivers/clk/qcom/Kconfig | 7 +
> drivers/clk/qcom/Makefile | 1 +
> drivers/clk/qcom/camcc-sm8550.c | 3564 +++++++++++++++++
> drivers/clk/qcom/clk-alpha-pll.c | 29 +
> drivers/clk/qcom/clk-alpha-pll.h | 2 +
> include/dt-bindings/clock/qcom,sm8550-camcc.h | 187 +
> 8 files changed, 3811 insertions(+), 2 deletions(-)
> create mode 100644 drivers/clk/qcom/camcc-sm8550.c
> create mode 100644 include/dt-bindings/clock/qcom,sm8550-camcc.h
>

Hi Bjorn,

All patches in this series are in reviewed state, could you please help
to pick this series in the next release? Thanks!

Thanks,
Jagadeesh

\
 
 \ /
  Last update: 2023-08-31 10:21    [W:0.086 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site