lkml.org 
[lkml]   [2023]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 04/11] arm64: dts: qcom: pm7250b: make SID configurable
From
On 30/08/2023 11:58, Luca Weiss wrote:
> Like other Qualcomm PMICs the PM7250B can be used on different addresses
> on the SPMI bus. Use similar defines like the PMK8350 to make this
> possible.
>
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
> arch/arm64/boot/dts/qcom/pm7250b.dtsi | 23 ++++++++++++++++-------
> 1 file changed, 16 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> index e8540c36bd99..3514de536baa 100644
> --- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
> @@ -7,6 +7,15 @@
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/spmi/spmi.h>
>
> +/* This PMIC can be configured to be at different SIDs */
> +#ifndef PM7250B_SID
> + #define PM7250B_SID 2
> +#endif

Why do you send the same patch as v1, without any reference to previous
discussions?

You got here feedback already.

https://lore.kernel.org/linux-arm-msm/f52524da-719b-790f-ad2c-0c3f313d9fe9@linaro.org/

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2023-08-30 21:32    [W:0.335 / U:2.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site