lkml.org 
[lkml]   [2023]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 0/1] can: esd_usb: Add support for esd CAN-USB/3
On 28.07.2023 17:08:56, Frank Jungclaus wrote:
> After having applied a vast number of improvements to the existing
> CAN-USB/2 driver here now is a new attempt to add support for the esd
> CAN-USB/3 CAN FD interface.
>
> Beside this patch there are the following to-do's left for follow-up
> patches:
>
> * In principle, the esd CAN-USB/3 supports Transmitter Delay
> Compensation (TDC), but currently only the automatic TDC mode is
> supported by this driver. An implementation for manual TDC
> configuration will follow.
>
> * Rework the code to no longer switch directly on the USB product IDs
> to handle different device setting for each supported USB
> device. Instead use the driver_info member within struct usb_device_id
> to hold / point to specific properties for each supported device.
>
> * Try to switch from synchronous send usb_bulk_msg() to asynchronous
> communication by means of usb_submit_urb() where it is feasible.

Added to linux-can-next/testing.

Thanks,
Marc

--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung Nürnberg | Phone: +49-5121-206917-129 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2023-08-03 10:18    [W:0.069 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site