lkml.org 
[lkml]   [2023]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v4 2/5] mm: LARGE_ANON_FOLIO for improved performance
On Thu, Aug 3, 2023 at 2:07 AM Yin Fengwei <fengwei.yin@intel.com> wrote:
>
> On 7/28/23 18:13, Ryan Roberts wrote:
> > On 27/07/2023 05:31, Yu Zhao wrote:
> >> On Wed, Jul 26, 2023 at 10:41 AM Yu Zhao <yuzhao@google.com> wrote:
> >>>
> >>> On Wed, Jul 26, 2023 at 3:52 AM Ryan Roberts <ryan.roberts@arm.com> wrote:
> >>>>
> >>>> Introduce LARGE_ANON_FOLIO feature, which allows anonymous memory to be
> >>>> allocated in large folios of a determined order. All pages of the large
> >>>> folio are pte-mapped during the same page fault, significantly reducing
> >>>> the number of page faults. The number of per-page operations (e.g. ref
> >>>> counting, rmap management lru list management) are also significantly
> >>>> reduced since those ops now become per-folio.
> >>>>
> >>>> The new behaviour is hidden behind the new LARGE_ANON_FOLIO Kconfig,
> >>>> which defaults to disabled for now; The long term aim is for this to
> >>>> defaut to enabled, but there are some risks around internal
> >>>> fragmentation that need to be better understood first.
> >>>>
> >>>> When enabled, the folio order is determined as such: For a vma, process
> >>>> or system that has explicitly disabled THP, we continue to allocate
> >>>> order-0. THP is most likely disabled to avoid any possible internal
> >>>> fragmentation so we honour that request.
> >>>>
> >>>> Otherwise, the return value of arch_wants_pte_order() is used. For vmas
> >>>> that have not explicitly opted-in to use transparent hugepages (e.g.
> >>>> where thp=madvise and the vma does not have MADV_HUGEPAGE), then
> >>>> arch_wants_pte_order() is limited to 64K (or PAGE_SIZE, whichever is
> >>>> bigger). This allows for a performance boost without requiring any
> >>>> explicit opt-in from the workload while limitting internal
> >>>> fragmentation.
> >>>>
> >>>> If the preferred order can't be used (e.g. because the folio would
> >>>> breach the bounds of the vma, or because ptes in the region are already
> >>>> mapped) then we fall back to a suitable lower order; first
> >>>> PAGE_ALLOC_COSTLY_ORDER, then order-0.
> >>>>
> >>>> arch_wants_pte_order() can be overridden by the architecture if desired.
> >>>> Some architectures (e.g. arm64) can coalsece TLB entries if a contiguous
> >>>> set of ptes map physically contigious, naturally aligned memory, so this
> >>>> mechanism allows the architecture to optimize as required.
> >>>>
> >>>> Here we add the default implementation of arch_wants_pte_order(), used
> >>>> when the architecture does not define it, which returns -1, implying
> >>>> that the HW has no preference. In this case, mm will choose it's own
> >>>> default order.
> >>>>
> >>>> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
> >>>> ---
> >>>> include/linux/pgtable.h | 13 ++++
> >>>> mm/Kconfig | 10 +++
> >>>> mm/memory.c | 166 ++++++++++++++++++++++++++++++++++++----
> >>>> 3 files changed, 172 insertions(+), 17 deletions(-)
> >>>>
> >>>> diff --git a/include/linux/pgtable.h b/include/linux/pgtable.h
> >>>> index 5063b482e34f..2a1d83775837 100644
> >>>> --- a/include/linux/pgtable.h
> >>>> +++ b/include/linux/pgtable.h
> >>>> @@ -313,6 +313,19 @@ static inline bool arch_has_hw_pte_young(void)
> >>>> }
> >>>> #endif
> >>>>
> >>>> +#ifndef arch_wants_pte_order
> >>>> +/*
> >>>> + * Returns preferred folio order for pte-mapped memory. Must be in range [0,
> >>>> + * PMD_SHIFT-PAGE_SHIFT) and must not be order-1 since THP requires large folios
> >>>> + * to be at least order-2. Negative value implies that the HW has no preference
> >>>> + * and mm will choose it's own default order.
> >>>> + */
> >>>> +static inline int arch_wants_pte_order(void)
> >>>> +{
> >>>> + return -1;
> >>>> +}
> >>>> +#endif
> >>>> +
> >>>> #ifndef __HAVE_ARCH_PTEP_GET_AND_CLEAR
> >>>> static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
> >>>> unsigned long address,
> >>>> diff --git a/mm/Kconfig b/mm/Kconfig
> >>>> index 09130434e30d..fa61ea160447 100644
> >>>> --- a/mm/Kconfig
> >>>> +++ b/mm/Kconfig
> >>>> @@ -1238,4 +1238,14 @@ config LOCK_MM_AND_FIND_VMA
> >>>>
> >>>> source "mm/damon/Kconfig"
> >>>>
> >>>> +config LARGE_ANON_FOLIO
> >>>> + bool "Allocate large folios for anonymous memory"
> >>>> + depends on TRANSPARENT_HUGEPAGE
> >>>> + default n
> >>>> + help
> >>>> + Use large (bigger than order-0) folios to back anonymous memory where
> >>>> + possible, even for pte-mapped memory. This reduces the number of page
> >>>> + faults, as well as other per-page overheads to improve performance for
> >>>> + many workloads.
> >>>> +
> >>>> endmenu
> >>>> diff --git a/mm/memory.c b/mm/memory.c
> >>>> index 01f39e8144ef..64c3f242c49a 100644
> >>>> --- a/mm/memory.c
> >>>> +++ b/mm/memory.c
> >>>> @@ -4050,6 +4050,127 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
> >>>> return ret;
> >>>> }
> >>>>
> >>>> +static bool vmf_pte_range_changed(struct vm_fault *vmf, int nr_pages)
> >>>> +{
> >>>> + int i;
> >>>> +
> >>>> + if (nr_pages == 1)
> >>>> + return vmf_pte_changed(vmf);
> >>>> +
> >>>> + for (i = 0; i < nr_pages; i++) {
> >>>> + if (!pte_none(ptep_get_lockless(vmf->pte + i)))
> >>>> + return true;
> >>>> + }
> >>>> +
> >>>> + return false;
> >>>> +}
> >>>> +
> >>>> +#ifdef CONFIG_LARGE_ANON_FOLIO
> >>>> +#define ANON_FOLIO_MAX_ORDER_UNHINTED \
> >>>> + (ilog2(max_t(unsigned long, SZ_64K, PAGE_SIZE)) - PAGE_SHIFT)
> >>>> +
> >>>> +static int anon_folio_order(struct vm_area_struct *vma)
> >>>> +{
> >>>> + int order;
> >>>> +
> >>>> + /*
> >>>> + * If THP is explicitly disabled for either the vma, the process or the
> >>>> + * system, then this is very likely intended to limit internal
> >>>> + * fragmentation; in this case, don't attempt to allocate a large
> >>>> + * anonymous folio.
> >>>> + *
> >>>> + * Else, if the vma is eligible for thp, allocate a large folio of the
> >>>> + * size preferred by the arch. Or if the arch requested a very small
> >>>> + * size or didn't request a size, then use PAGE_ALLOC_COSTLY_ORDER,
> >>>> + * which still meets the arch's requirements but means we still take
> >>>> + * advantage of SW optimizations (e.g. fewer page faults).
> >>>> + *
> >>>> + * Finally if thp is enabled but the vma isn't eligible, take the
> >>>> + * arch-preferred size and limit it to ANON_FOLIO_MAX_ORDER_UNHINTED.
> >>>> + * This ensures workloads that have not explicitly opted-in take benefit
> >>>> + * while capping the potential for internal fragmentation.
> >>>> + */
> >>>
> >>> What empirical evidence is SZ_64K based on?
> >>> What workloads would benefit from it?
> >>> How much would they benefit from it?
> >>> Would they benefit more or less from different values?
> >>> How much internal fragmentation would it cause?
> >>> What cost function was used to arrive at the conclusion that its
> >>> benefits outweigh its costs?
> >
> > Sorry this has taken a little while to reply to; I've been re-running my perf
> > tests with the modern patches to recomfirm old data.
> >
> > In terms of empirical evidence, I've run the kernel compilation benchmark (yes I
> > know its a narrow use case, but I figure some data is better than no data), for
> > all values of ANON_FOLIO_MAX_ORDER_UNHINTED {4k, 16k, 32k, 64k, 128k, 256k}.
> >
> > I've run each test 15 times across 5 system reboots on Ampere Altra (arm64),
> > with the kernel configured for 4K base pages - I could rerun for other base page
> > sizes if we want to go further down this route.
> >
> > I've captured run time and peak memory usage, and taken the mean. The stdev for
> > the peak memory usage is big-ish, but I'm confident this still captures the
> > central tendancy well:
> >
> > | MAX_ORDER_UNHINTED | real-time | kern-time | user-time | peak memory |
> > |:-------------------|------------:|------------:|------------:|:------------|
> > | 4k | 0.0% | 0.0% | 0.0% | 0.0% |
> > | 16k | -3.6% | -26.5% | -0.5% | -0.1% |
> > | 32k | -4.8% | -37.4% | -0.6% | -0.1% |
> > | 64k | -5.7% | -42.0% | -0.6% | -1.1% |
> > | 128k | -5.6% | -42.1% | -0.7% | 1.4% |
> > | 256k | -4.9% | -41.9% | -0.4% | 1.9% |
>
> Here is my test result:
>
> real user sys
> hink-4k: 0% 0% 0%
> hink-16K: -3% 0.1% -18.3%
> hink-32K: -4% 0.2% -27.2%
> hink-64K: -4% 0.5% -31.0%
> hink-128K: -4% 0.9% -33.7%
> hink-256K: -5% 1% -34.6%
>
>
> I used command:
> /usr/bin/time -f "\t%E real,\t%U user,\t%S sys" make -skj96 allmodconfig all
> to build kernel and collect the real time/user time/kernel time.
> /sys/kernel/mm/transparent_hugepage/enabled is "madvise".
> Let me know if you have any question about the test.
>
> I also find one strange behavior with this version. It's related with why
> I need to set the /sys/kernel/mm/transparent_hugepage/enabled to "madvise".
> If it's "never", the large folio is disabled either.
> If it's "always", the THP will be active before large folio. So the system is
> in the mixed mode. it's not suitable for this test.
>
> So if it's "never", large folio is disabled. But why "madvise" enables large
> folio unconditionly? Suppose it's only enabled for the VMA range which user
> madvise large folio (or THP)?

Indeed. It's a very peculiar behavior, as I called out in another email

\
 
 \ /
  Last update: 2023-08-04 02:29    [W:0.082 / U:1.216 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site