lkml.org 
[lkml]   [2023]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: display/msm: document DPU on SM7150
On 2023-08-03 22:47:23, Danila Tikhonov wrote:
> Document the DPU hardware found on the Qualcomm SM7150 platform.
>
> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
> ---
> .../bindings/display/msm/qcom,sm7150-dpu.yaml | 116 ++++++++++++++++++
> 1 file changed, 116 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml
> new file mode 100644
> index 000000000000..0d86997ae09f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm7150-dpu.yaml
> @@ -0,0 +1,116 @@
> +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/msm/qcom,sm7150-dpu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SM7150 Display DPU
> +
> +maintainers:
> + - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> + - Danila Tikhonov <danila@jiaxyga.com>
> +
> +$ref: /schemas/display/msm/dpu-common.yaml#
> +
> +properties:
> + compatible:
> + const: qcom,sm7150-dpu
> +
> + reg:
> + items:
> + - description: Address offset and size for mdp register set
> + - description: Address offset and size for vbif register set
> +
> + reg-names:
> + items:
> + - const: mdp
> + - const: vbif
> +
> + clocks:
> + items:
> + - description: Display hf axi clock
> + - description: Display ahb clock
> + - description: Display rotator clock
> + - description: Display lut clock
> + - description: Display core clock
> + - description: Display vsync clock
> +
> + clock-names:
> + items:
> + - const: bus
> + - const: iface
> + - const: rot
> + - const: lut
> + - const: core
> + - const: vsync
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - clocks
> + - clock-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/qcom,sm7150-dispcc.h>
> + #include <dt-bindings/clock/qcom,sm7150-gcc.h>
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> +
> + display-controller@ae01000 {
> + compatible = "qcom,sm7150-dpu";
> + reg = <0x0ae01000 0x8f000>,
> + <0x0aeb0000 0x2008>;
> + reg-names = "mdp", "vbif";
> +
> + clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>,
> + <&dispcc DISP_CC_MDSS_ROT_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
> + <&dispcc DISP_CC_MDSS_MDP_CLK>,
> + <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
> + clock-names = "bus", "iface", "rot", "lut", "core",
> + "vsync";
> +
> + assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>,
> + <&dispcc DISP_CC_MDSS_ROT_CLK>,
> + <&dispcc DISP_CC_MDSS_AHB_CLK>;
> + assigned-clock-rates = <19200000>,
> + <19200000>,
> + <19200000>;
> +
> + operating-points-v2 = <&mdp_opp_table>;
> + power-domains = <&rpmhpd SM7150_CX>;
> +
> + interrupt-parent = <&mdss>;
> + interrupts = <0>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + endpoint {
> + remote-endpoint = <&dsi0_in>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + endpoint {
> + remote-endpoint = <&dsi1_in>;
> + };

I don't think this compiles with a missing closing bracket. Did you
test the bindings?

- Marijn

> +
> + port@2 {
> + reg = <2>;
> + endpoint {
> + remote-endpoint = <&dp_in>;
> + };
> + };
> + };
> + };
> +...
> --
> 2.41.0
>

\
 
 \ /
  Last update: 2023-08-03 23:51    [W:0.046 / U:1.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site