lkml.org 
[lkml]   [2023]   [Aug]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 2/2] cpufreq: add virtual-cpufreq driver
On Mon, Jul 31, 2023 at 10:46:09AM -0700, David Dai wrote:
> Introduce a virtualized cpufreq driver for guest kernels to improve
> performance and power of workloads within VMs.
>
> This driver does two main things:
>
> 1. Sends the frequency of vCPUs as a hint to the host. The host uses the
> hint to schedule the vCPU threads and decide physical CPU frequency.
>
> 2. If a VM does not support a virtualized FIE(like AMUs), it queries the
> host CPU frequency by reading a MMIO region of a virtual cpufreq device
> to update the guest's frequency scaling factor periodically. This enables
> accurate Per-Entity Load Tracking for tasks running in the guest.
>
> Co-developed-by: Saravana Kannan <saravanak@google.com>
> Signed-off-by: Saravana Kannan <saravanak@google.com>
> Signed-off-by: David Dai <davidai@google.com>

[...]

> +static void virt_scale_freq_tick(void)
> +{
> + struct cpufreq_policy *policy = cpufreq_cpu_get(smp_processor_id());
> + struct virt_cpufreq_drv_data *data = policy->driver_data;
> + u32 max_freq = (u32)policy->cpuinfo.max_freq;
> + u64 cur_freq;
> + u64 scale;
> +
> + cpufreq_cpu_put(policy);
> +
> + cur_freq = (u64)data->ops->get_freq(policy);
> + cur_freq <<= SCHED_CAPACITY_SHIFT;
> + scale = div_u64(cur_freq, max_freq);
> +
> + this_cpu_write(arch_freq_scale, (unsigned long)scale);
> +}
> +

We expect the host to provide the frequency in kHz, can you please add a
comment about it. It is not very obvious when you look at the
REG_CUR_FREQ_OFFSET register name.

> +static struct scale_freq_data virt_sfd = {
> + .source = SCALE_FREQ_SOURCE_VIRT,
> + .set_freq_scale = virt_scale_freq_tick,
> +};
> +
> +static unsigned int virt_cpufreq_set_perf(struct cpufreq_policy *policy)
> +{
> + struct virt_cpufreq_drv_data *data = policy->driver_data;
> + /*
> + * Use cached frequency to avoid rounding to freq table entries
> + * and undo 25% frequency boost applied by schedutil.
> + */
> + u32 freq = mult_frac(policy->cached_target_freq, 80, 100);
> +
> + data->ops->set_freq(policy, freq);
> + return 0;
> +}

Why do we undo the frequency boost? A governor may apply other boosts
like RT (uclamp), iowait. It is not clear why we need to worry about
governor policies here.

> +
> +static unsigned int virt_cpufreq_fast_switch(struct cpufreq_policy *policy,
> + unsigned int target_freq)
> +{
> + virt_cpufreq_set_perf(policy);
> + return target_freq;
> +}
> +
> +static int virt_cpufreq_target_index(struct cpufreq_policy *policy,
> + unsigned int index)
> +{
> + return virt_cpufreq_set_perf(policy);
> +}
> +
> +static int virt_cpufreq_cpu_init(struct cpufreq_policy *policy)
> +{
> + struct virt_cpufreq_drv_data *drv_data = cpufreq_get_driver_data();
> + struct cpufreq_frequency_table *table;
> + struct device *cpu_dev;
> + int ret;
> +
> + cpu_dev = get_cpu_device(policy->cpu);
> + if (!cpu_dev)
> + return -ENODEV;
> +
> + ret = dev_pm_opp_of_add_table(cpu_dev);
> + if (ret)
> + return ret;
> +
> + ret = dev_pm_opp_get_opp_count(cpu_dev);
> + if (ret <= 0) {
> + dev_err(cpu_dev, "OPP table can't be empty\n");
> + return -ENODEV;
> + }
> +
> + ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &table);
> + if (ret) {
> + dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
> + return ret;
> + }
> +
> + policy->freq_table = table;
> + policy->dvfs_possible_from_any_cpu = false;
> + policy->fast_switch_possible = true;
> + policy->driver_data = drv_data;
> +
> + /*
> + * Only takes effect if another FIE source such as AMUs
> + * have not been registered.
> + */
> + topology_set_scale_freq_source(&virt_sfd, policy->cpus);
> +
> + return 0;
> +
> +}
> +

Do we need to register as FIE source even with the below commit? By
registering as a source, we are not supplying any accurate metric. We
still fallback on the same source that cpufreq implements it.

874f63531064 ("cpufreq: report whether cpufreq supports Frequency
Invariance (FI)")

Thanks,
Pavan

\
 
 \ /
  Last update: 2023-08-03 06:20    [W:0.144 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site